Bespoke Goods Lift York

Bespoke 400kg single mast hydraulic Goods Lift with 90° loading installed York North Yorkshire with a finished floor level 3390mm and platform size 1100mm x 1100mm fitted with 1100mm high infilled panels on the non-loading sides and single opening interlocked gate finished in Red RAL 3020 The self-supporting lift structure manufactured from 100mm x 100mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high single loading door cladded with Perspex viewing panel at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2200mm. On the ground floor level a fixed ramp 1250mm long x 1180mm wide will be provided to assist loading on to the 90mm deep platform finished Red RAL 3020. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 2.2Kw control voltage 24 volt IP55. General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor Installation; Stoneacre Motor Group, Jockey Lane, Monks Cross, York, North Yorkshire YO32 9GY Manual Handling Solutions - Goods Lifts offer bespoke custom designed materials handling and lifting equipment. We provide some of the most advanced handling equipment available from standard products to a bespoke solution. Our range of lifting equipment and materials handling products are by far the most sophisticated and technically advanced and manufactured to the highest standard. As a Handling Solutions provider our goal is to work closely with our customers and bring the most technically advanced handling products - solutions to market. The goods lifts range of hydraulic goods lifts are ideal for supermarkets, warehouses, factories, restaurants, pubs, museums, theatres, hotels, retail in basement or light-well locations. Goods Lifts covering, Market Weighton, Selby, Tadcaster, Hull, Bridlington, Goole, Thirsk, Ripon. For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/ #goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage

For more information on Bespoke Goods Lift York talk to Manual Handling Solutions, Goods Lifts