Goods Lift Crawley

Goods Lift Crawley Goods Lifts for Commercial and Industrial use a 2 stop 500kg twin mast hydraulic Goods Lift installed Crawley West Sussex next to Gatwick Airport. At the lower level the lift can be accessed from either side, through car loading and at the upper level single entry only, the finished floor level is 5000mm and the external doors are 2500mm. Goods Lift has a platform size is 1600mm x 1980mm and this is fitted with a fully enclosed cabin to a height 2400mm and twin platform gates which are fully interlocked with the external doors. At the lower level entrances the lift is accessed by loading ramps 1680mm wide a 1250mm long x 120mm high. The self-supporting lift structure is manufactured from 100mm x 100mm box section steel with clad infilled panels. Goods lift fitted with 2500mm high double loading gates cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2750mm. Goods lift fitted with safety shoot bolts which allows for the operator to enter the lift platform safely while the lift is docked at the upper level, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at both levels fitted as standard. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 3Kw control voltage 24 volt IP55. General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor Installation; Crawley West Sussex (next to Gatwick Airport) For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/ Manual Handling Solutions - Goods Lifts offer bespoke custom designed materials handling and lifting equipment. We provide some of the most advanced handling equipment available from standard products to a bespoke solution. Our range of lifting equipment and materials handling products are by far the most sophisticated and technically advanced and manufactured to the highest standard. As a Handling Solutions provider our goal is to work closely with our customers and bring the most technically advanced handling products - solutions to market.

For more information on Goods Lift Crawley talk to Manual Handling Solutions, Goods Lifts