Hydraulic Goods Lifts Rushden

Bespoke through car 350kg twin mast hydraulic Goods Lift installed Rushden Northants with a finished floor level 2637mm and platform size 1100mm x 1650mm fitted with 1100mm high infilled panels on the non-loading sides and twin opening interlocked gates finished in Traffic Yellow RAL 1023 A free standing self-supporting lift structure manufactured from 100mm x 100mm box section steel with clad infilled panels Silky Grey RAL 7044. Goods lift fitted with 2000mm high double loading gates cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2200mm. Goods lift fitted with safety shoot bolts which allow for the operator to enter the lift platform safely while the lift is docked at the upper level, also “Press to Go” one touch controls with emergency stop at both levels. At the lower level a fixed ramp 1250mm long x 1650mm wide will be provided to assist loading on to the 120mm deep platform finished Traffic Yellow RAL 1023. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 2.2Kw control voltage 24 volt IP55. General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor Installation; 1 Spire Road, Rushden, Northamptonshire, NN10 0FN Manual Handling Solutions continues to build its reputation by delivering on time and on budget and by paying attention to every detail. Our portfolio of goods lifts have been designed and manufactured for reliability and functionality. We also offer ongoing support and maintenance for our goods lifts after the initial warranty period has expired. We place great communication and customer relationship development at the forefront of our work and welcome the opportunity to discuss any goods lift requirements that you may have. We would be happy to come to you to discuss costs, options and arrange, where needed, a free basic lift status survey. Our goods lifts range of hydraulic goods lifts are ideal for supermarkets, warehouses, factories, restaurants, pubs, museums, theatres, hotels, retail in basement or light-well locations. Hydraulic Goods Lift covering Caldecott, Stanwick, Kettering, Earls Barton, Thrapston For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com

For more information on Hydraulic Goods Lifts Rushden talk to Manual Handling Solutions, Goods Lifts