MPRCG1 (2023) Bed Leaving Detection Alarm with Caregiver Radio Pager

MPRCG1 (2023) Bed Leaving Detection Alarm with Caregiver Radio Pager ? All-inclusive bed leaving detection alarm for domestic, commercial, and NHS fall prevention ? Patient bed exit notifications relayed to caregiver via tone/vibration alert radio pager ? Can be used singularly or expanded for multiple patients by adding additional sensors ? Minimal installation ready to use straight out of the box Included: 1 x BTX21-MP alarm sensor transmitter, 1 x MP-PAG31 radio pager, 1 x MPUBP10L bed pressure mat sensor, all required batteries. The MPRCG1 is an all-inclusive bed leaving detection care provider alarm system. Set up and use is simplistic, requiring only placement of the bed pressure sensor mat under the bed mattress. The BTX21 sensor alarm control transmitter is armed when a person lays on the bed. When they rise and stand up the alarm signal is transmitted to the alarm pager. The BTX21 has an alarm mode selection switch to choose from instant, or delayed alarm times of 15, and 30 minutes. The RCG systems are amongst the most popular fall prevention products and have been for over 20 years. Key Features Complete bed leaving detection alarm system Proven to reduce falls in domestic, commercial, and NHS care Durable antimicrobial disinfectant resistant sensor material Wireless alarm signal to care provider pager Pager notification alert by vibration and or audible tone Quick and easy to instal and use Can be used singularly or as part of a multi-patient solution with additional sensors All battery powered solution for convenience and portability Technical Features: MPUFBP20L Sensor with Cable Dimension: 30 x 20 (76.2 x 50.8cm) Total thickness: 0.8mm Material: PVC Operating temperature: 10C - 40C Sensor pocket connector: Mini-USB female Sensor contacts material: Silver/Carbon paste Connection cable length: 1.95cm Cable connectors: USB mini (male) to RJ12 Technical Features BTX21-MP Sensor Transmitter Sensor triggered transmitter Transmission frequency: 433MHz Transmission range: 75-150M Powered by 3 x AA 1.5V batteries DC power adaptor input: 6V @1 amp (optional) Output 6.33mm socket for nurse call connection Input 6.3mm socket for cabled nurse call switch Dimensions: 115mm x 75mm x 30mm Locking (screw) battery compartment Concealed external on/off switch Connector cable strain relief clamp Selectable alarm delay 2 seconds, 15 minutes Wall fixing bracket included Technical Features (MP-PAG31 Pager) Power source: 2 x AA batteries Receiver range: 100 metres Radio frequency: 433MHz Dimensions: L: 80mm x H: 52mm x W: 25mm Weight: 63g (without batteries) Learns in (pairs) with 3 transmitters 3 Channel pager receiver with LEDs for Sen 1, Sen 2, Sen 3 Volume/vibration select button Alarm cancel/reset button Strong belt clip and lanyard attachment clip Simple transmitter pairing Status indicator LED: Low battery, active alarm Alert options: Vibrate only, vibrate and low tone or vibrate and high tone volume Pager low battery warning and sensor low battery (with compatible transmitters) Side power On/Off switch

For more information on MPRCG1 (2023) Bed Leaving Detection Alarm with Caregiver Radio Pager talk to Medpage Ltd