Calpeda NG Series Horizontal Self Priming Well Jet Pump - Low Viscosity Apllication

Calpeda NG Series Horizontal Self Priming Well Jet Pump Flow RateUp to 9.5m³/hrHead (Pressure)Up to 89mInlet/Outlet Sizes1" to 1 1/2"Operating Temperature0°C to 40°CDrive OptionsElectric Motor The Calpeda NG series of self priming well jet pump is designed for extracting water from wells. It comes complete with a built in ejector that allows it to perform high suction lifts. This well pump can be constructed with a cast iron casing (NG version) or bronze casing (B-NG version), both versions come with a brass impeller. Common applications include; extracting water from a well, lifting water that contains large amounts of air or gases, boosting water pressure, garden use or jet washing. Pumped fluids must be clean or slightly dirty and free of solid or abrasive particles. The largest self priming well pump models are capable of producing pressures up to 8.9 bar and flow rates up to 9.5m³/hr. This Calpeda pump range is supplied with BSP connections as standard.Motor options include 230V single phase 50Hz and 230V/400V three phase 50Hz, other voltages and 60Hz motors are available on request. Product Summary •Horizontal close coupled self priming well jet pump•Can perform high suction lifts•Compact design•Suitable for clean or slightly dirty fluids without solids or abrasive particles•Constructed with either cast iron casing or bronze casing, both versions come with a brass impeller•BSP connections as standard•Motor options include; 230V/1Ph/50Hz and 230V/400V/3Ph/50Hz, other voltages and 60Hz available on request•IP54 as standard, IP55 available on request•Special mechanical seals available on request

For more information on Calpeda NG Series Horizontal Self Priming Well Jet Pump - Low Viscosity Apllication talk to North Ridge Pumps Ltd