COMBIFLUX Barrel Pump Kit For Wastewater Treatment Industry

COMBIFLUX Barrel Pump KitCOMBIFLUX Barrel Pump Kit Flow RateUp to 12 l/minDischarge HeadUp to 8.5 mwcExternal Tube Diameter25 - 32 mmImmersion Length700, 1000 mmViscosity<1 - 250 cPsMax. Fluid Temperature45 °CPump Tube Materials (External)PolypropyleneDrive OptionsFBM-B 3100 Battery Motor FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc.. FLUX F300 pump series has been designed for light - medium duties and low viscosity fluids up to 250 mPas/cPs, these range of pumps can also be supplied as a complete pump kit containing a discharge hose, hand nozzle and compression glands depending on the specific model, fume glands and foot strainers are also available upon request. The COMBIFLUX pump kit is supplied with a removable battery powered or electric single phase dual speed motor, (110V and 230V) these motors have an integrated overload cut-out switch for added operational safety this transfer pump kit is supplied with a FP 314 PP sealless 700 or 1000 mm length pump, discharge hose, hand nozzle and electric commutator FEM 3070 motor, the motors are connected to the pump by a quick release coupling type connection meaning several pumps can be operated with the same motor and as a result reducing possibilities of cross-contamination in applications where different liquids need to be pumped. Design Features/Benefits • Sealless pump in fluid section.• Compact and light design, with integrated ergonomic handle.• Highly engineered PTFE bearings.• Suitable for containers with small inlet ports/narrow-necked openings.• Dual speed single phase double insulated motors with overload cut-out switch• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Heavy duty chemical resistant ETFE impellers.• Available battery powered or with single phase (110V / 230V) electric motors Typical Fluids: • Acids and alkalis• Fertilizer solutions• Cleaning solutions• Water• Concentrated nitric acid• Sulphuric• Acetic acidKit Components: • COMBIFLUX FP 314 PP 25/19 in polypropylene *Or*• COMBIFLUX FP 314 PP 32/19 in polypropylene• Battery motor FBM-B 3100 with charger, 220-240 V, 50-60 Hz• PVC hose DN 13, 1,5 m long• Hand nozzle in polypropylene

For more information on COMBIFLUX Barrel Pump Kit For Wastewater Treatment Industry talk to North Ridge Pumps Ltd