Flux F424 Seal-less Barrel Pumps For Wastewater

F424 Seal-less Barrel Pump Flow RateUp to 240 l/minDischarge HeadUp to 30 mwcExternal Tube Diameter 40 - 50 mmImmersion Length700, 1000, 1200 mmViscosity<1 - 1200 cPsFluid Temperature0 - 100°C for SS 316, 0 - 50°C for PP Model, 0 - 80°C for PVDF (0 - 40°C for ATEX Applications)Pump Tube Materials (External)Stainless Steel, PVDF and PolypropyleneDrive OptionsCommutator & Brushless Electric Motors, Compressed Air Motors and 3-Phase Gear Motors FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc. The FLUX FP 424 pump range is available with a variety of electric and air motors in both single and 3-phase, these pumps can also be supplied as a complete pump kit containing a discharge hose, hand nozzle and compression glands depending on the specific model, carrying handles, fume glands and foot strainers are also available upon request. ATEX (explosion proof) models are also available suitable for Zoned (non-safe/hazardous) areas or applications. Design Features/Benefits • Sealless pump in fluid section• Non-ferrous metal construction - specifically designed for transferring AdBlue®• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Supplied with steel cored internal tube for added stability (Extra bearing support).• Special bearing guide fitted inside internal tube for better shaft support.• Low vibration thus longer operating lifespan thanks to its unique spiral bearing guide design• Heavy duty ETFE impellers fitted as standard Typical Fluids for Each Model/Material: Polypropylene:Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water. PVDF (Polyvinylidene Fluoride):Hydrobromic acid, chloric acid, chromic acid, hydrofluoric acid, battery acid, nitric acid, nitrous acid, sulfuric acid, acetic acid (up to 80 %), methyl sulfuric, perchloric acid, peracetic acid, phosphoric acid, potassium (potash bleaching lye), sodium hypochlorite, sodium chloride (table salt), potassium chloride, sodium sulfate, sodium carbonate. Stainless Steel 316:Petroleum, diesel, heating oil, hydraulic oil, engine oil, engine oil, gasoline, formic acid (85 %), ethyl glycol, petroleum, "MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit. Motors Available & Capacity:Commutator Motors: FEM 4070 Flow rate max. 215 l/min Discharge head max. 26 mwcF457 / F457 EL Flow rate max. 220 l/min Discharge head max. 30 mwcF458 / F 458 EL Flow rate max. 200 l/min Discharge head max. 23 mwcF 460 EX / F 460 EX EL Flow rate max. 200 l/min Discharge head max. 23 mwcF 458-1 / F 460-1 EX Flow rate max. 220 l/min Discharge head max. 28 mwcBrushless Motors: FBM 4000 EX Flow rate max. 220 l/min Discharge head max. 30 mwc3-Phase Gear Motor: F 414 Flow rate max. 185 l/min Discharge head max. 21 mwcCompressed-Air Motors: F 416 EX / F 416-1 EX / F 416-2 EX Flow rate max. 240 l/min Discharge head max. 30 mwc Accessories: • Trigger Guns/Nozzles• Fume Glands• Compression Glands• Foot Strainers• Carrying Handles• Hose

For more information on Flux F424 Seal-less Barrel Pumps For Wastewater talk to North Ridge Pumps Ltd