Flux FES Seal-less Barrel Pump Kit for Cleaning Agents & Disinfectants For Corrosive Liquids

FES800 Seal-less Barrel Pump Kit for Cleaning Agents & Disinfectants Flow RateUp to 165 l/minDischarge HeadUp to 9.5 mwcExternal Tube Diameter 41 mmImmersion Length800 mmViscosity<1 - 600 cPsFluid Temperature0 - 50 °CPump Tube Materials (External)PolypropyleneDrive OptionsCommutator Electric Motors - FEM 4070, 230 Volt, 50 Hz, 500 Watt FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc. The FES800 pump kit is supplied with an electric single phase dual speed motor, (110V and 230V) these motors have an integrated overload cut-out switch for added operational safety, this transfer pump kit is supplied with a FP 424 PP sealless 800 mm length pump, discharge hose, hand nozzle and electric commutator FEM 4070 motor and fume gland. Design Features/Benefits • Sealless pump in fluid section.• Supplied with fume gland, designed to stop any vapour escaping the pump.• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Supplied with steel cored internal tube for added stability (Extra bearing support).• Special bearing guide fitted inside internal tube for better shaft support.• Low vibration thus longer operating lifespan thanks to its unique spiral bearing guide design• Heavy duty ETFE impellers fitted as standard Typical Fluids: • Chlorine bleaching (sodium hypochlorite)• Cleaning and disinfecting chemicals Motors Available & Capacity:Commutator Motors: FEM 4070 Flow rate max. 165 l/min Discharge head max. 9.5 mwcKit Components: • Drum pump F 424 PP-41/36 in polypropylene• Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt• PVC hose 2 m long• Hand nozzle polypropylene• Fume gland

For more information on Flux FES Seal-less Barrel Pump Kit for Cleaning Agents & Disinfectants For Corrosive Liquids talk to North Ridge Pumps Ltd