Flux FP 425 / 99.98% Emptying Barrel Pump For Wastewater Treatment Industry

FP 425 / 99.98% Barrel Emptying Pump Flow RateMaximum of 120 l/minDischarge HeadMaximum of 26 MwcExternal Tube Diameter 41 - 50 mmImmersion Length700mm, 1000mm, 1200mmViscosity<1 -1200 cPsFluid TemperatureHastelloy C: 0-120°C, SS316 0- 100°C, PP 0 - 50°C (0 - 40°C for ATEX Applications)Pump Tube Materials (External)Hastelloy C, Stainless Steel 316, PolypropyleneDrive OptionsCommutator & Brushless Electric Motors, Compressed Air Motors and 3-Phase Gear Motor The Flux F/FP 425 barrel emptying pump is the ideal solution for transferring expensive or hazardous chemicals as it empties 99.98% of the drum's content , meaning it leaves next to no product in the container making this pump the most cost effective and safe way to transfer or extract liquid from a drum or IBC container. Another great feature on this pump is the fact that it has an integrated foot valve which the operator can easily close before taking the pump out of the drum avoiding spillage as well as preventing any backflow from going back into the container, this could reduce wastage considerably when one pump is being used to empty several drums, this also makes the FP 425 barrel pump one of the safest options when handling hazardous or flammable liquids. Flux pumps are available in several different tube length sizes, 1000 mm suitable for 205 litre drums and 1200 mm for IBC containers, there is also a 700 mm standard tube set for other smaller containers. Features:- Empties up to 99.98% of all liquid from containers. Some pumps can leave as much as 6% of contents. With this design only 0.05 litres will remain in an IBC or Drum. - Non Return valve prevents liquid from flowing out of pump tube, meaning drips and any wastage is kept to a minute amount when using between containers - Designed to be easily stripped for cleaning and sanitization in-between batches - Designed to be used in conjunction with a hand nozzle without stopping pump - Mechanically sealed ensuring full containment of vapours, and reduce contamination with atmosphere - Fully ATEX Approved for use in the most hazardous of areas - Shaft bearing is grease lubricated for long life design - As pump is of centrifugal design, pumping motion is pulse free Common Fluids By Material: Polypropylene:Acids and alkalis such as Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water. Stainless Steel 316:Petroleum Products such as as Petroleum, diesel, heating oil, hydraulic oil, machine oil, engine oil, gasoline, formic acid (85 %), ethyl glycol, petroleum, diesel, napthta. Chemicals such as "MEK (methyl ethyl ketone/butanone), octane, ethanol, methanol, butanol, acetone, toluene, isobutanol, propanol, xylene, urea solutions. Hastelloy C:Petroleum such as Gasoline, petroleum , ethylene glycol, petroleum. Chemicals such as formic acid (85% concentration), ethylene glycol, petroleum, MEK (methyl ethyl ketone/butanone), octane. Pump & Motor Combinations with Capacity: MotorFlowHeadCommutatorFEM4070105L/min7.5MF457 / F457 EL120L/min11MF458 / F458 EL115L/min8MF460 Ex / F460 Ex El115L/min8MF458-1 / F460-1 Ex110L/min10MBrushlessFBM4000 Ex110L/min8M3 Phase Gear MotorF414100L/min7MCompressed AirF416 Ex, F41601 Ex, F416-2 Ex130L/min13M Relevant Accessories:• Nozzles for controlling dispensing of fluids • Container Glands to keep pump upright and prevent fumes escaping• Pump Strainers to filter fluids• Top mounted handles to enable lowering and highering of pump via a hoist.• Hoses which can be swaged to pumps, nozzles and flowmeter to prevent leakage from joints

For more information on Flux FP 425 / 99.98% Emptying Barrel Pump For Wastewater Treatment Industry talk to North Ridge Pumps Ltd