Flux FP 430 Mechanically Sealed High Temperature Barrel Pumps For Wastewater

FP 430 Mechanically Sealed High Temperature Barrel Pump Flow RateUp to 240 l/minDischarge HeadUp to 30 mwcExternal Tube Diameter 40 - 50 mmImmersion Length700, 1000, 1200 mm, 1500 mmViscosity<1 -1200 cPsFluid TemperatureHastelloy C Model: 0 - 120°C, 0 - 100°C for SS 316, 0 - 50°C for PP Model, 0 - 80°C for PVDF, & Aluminium / (0 - 40°C for ATEX Applications)Pump Tube Materials (External)Stainless Steel 316, Hastelloy C, Polypropylene, PVDF, AluminiumDrive OptionsCommutator & Brushless Electric Motors, Compressed Air Motors and 3-Phase Gear Motor FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc. The FLUX FP 430 pump range is available with a variety of electric and air motors in both single and 3-phase, these pumps can also be supplied as a complete pump kit containing a discharge hose, hand nozzle and compression glands depending on the specific model, carrying handles, fume glands and foot strainers are also available upon request. These heavy-duty pump range is suitable for abrasive products and it can also handle liquids with solid particles with quite low wear on its internals. For high flow rate applications, a 50 mm diameter discharge pump is available capable of doing a max. of 240 l/min. Design Features/Benefits • ATEX (explosion proof) certified for stainless steel and Hastelloy-C versions.• Grease lubricated shaft bearing.• Can handle solid particles and abrasives whilst having minimal wear.• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Mechanically sealed - prevents any liquid entering the internal tube section.• PP & PVDF models supplied with steel cored internal tube for added stability (Extra bearing support).• Heavy duty ETFE impellers fitted as standard• Available with electric or air operated motors.• FDA / Food-grade option available• Fast disassembly into two main parts due to screw-on foot component, allowing the pump to be cleaned and maintained with ease.• Tube lengths up to 3000 mm due to having 5 heavy duty bearings providing extra support to the drive shaft. Typical Fluids for Each Model/Material: Polypropylene:Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water. PVDF (Polyvinylidene Fluoride):Hydrobromic acid, chloric acid, chromic acid, hydrofluoric acid, battery acid, nitric acid, nitrous acid, sulfuric acid, acetic acid (up to 80 %), methyl sulfuric, perchloric acid, peracetic acid, phosphoric acid, potassium (potash bleaching lye), sodium hypochlorite, sodium chloride (table salt), potassium chloride, sodium sulfate, sodium carbonate. Aluminium:Petroleum, diesel, heating oil, hydraulic oil, engine oil, machine oil Stainless Steel 316:Ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit, diesel. Hatelloy C:Gasoline, formic acid (85%), ethylene glycol, petroleum, MEK (methyl ethyl ketone/butanone), octane. Motors Available & Capacity:Commutator Motors: FEM 4070 Flow rate max. 215 l/min Discharge head max. 26 mwcF 457 / F 457 EL Flow rate max. 220 l/min Discharge head max. 30 mwcF 458 / F 458 EL Flow rate max. 200 l/min Discharge head max. 23 mwcF 460 Ex / F 460 Ex EL Flow rate max. 200 l/min Discharge head max. 23 mwcF 458-1 / F 460-1 Ex Flow rate max. 220 l/min Discharge head max. 28 mwcBrushless Motors: FBM 4000 Ex Flow rate max. 220 l/min Discharge head max. 23 mwc3-Phase Gear Motor: F 414 Flow rate max. 185 l/min Discharge head max. 21 mwcCompressed-Air Motors: F 416 Ex / F 416-1 Ex / F 416-2 Ex Flow rate max. 240 l/min Discharge head max. 30 mwc Accessories: • Trigger Guns/Nozzles• Fume Glands• Compression Glands• Foot Strainers• Carrying Handles• Hoses

For more information on Flux FP 430 Mechanically Sealed High Temperature Barrel Pumps For Wastewater talk to North Ridge Pumps Ltd