Flux Seal-less Drum & IBC's Pump Kit for Alkalis For Wastewater

FLUX Seal-less Drum & IBC's Pump Kit for Alkalis Flow RateUp to 165 l/minDischarge HeadUp to 9.5 mwcExternal Tube Diameter 41 mmImmersion Length1000, 1200 mmViscosity<1 - 800 cPsFluid Temperature0 - 50 °CPump Tube Materials (External)PolypropyleneDrive OptionsFEM4070 Commutator Motor - 230V/50Hz/500 Watt FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc. This FLUX drum/IBC's pump kit is specifically designed for handling alkalis fluids and is supplied with a F424 sealless 1000 or 1200 mm length pump in polypropylene, discharge hose, hand nozzle, compression gland and commutator FEM 4070. Design Features/Benefits • Sealless pump in fluid section• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Supplied with steel cored internal tube for added stability (Extra bearing support).• Special bearing guide fitted inside internal tube for better shaft support.• Low vibration thus longer operating lifespan thanks to its unique spiral bearing guide design• Heavy duty ETFE impellers fitted as standard Typical Fluids: • Potassium hydroxide• Sodium hydroxide• Ammonia water• Formic acid (50 %)• Acetic acid (80 %) Motors Available & Capacity:Commutator Motors: FEM 4070 Flow rate max. 165 l/min Discharge head max. 9.5 mwcKit Components: • Drum/IBC'c pump F 424 PP-41/36 in polypropylene• Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt• PVC Hose - 2 m long• Hand nozzle in polypropylene• Compression gland in polypropylene

For more information on Flux Seal-less Drum & IBC's Pump Kit for Alkalis For Wastewater talk to North Ridge Pumps Ltd