JUNIORFLUX Barrel Pump Kit For Wastewater

JUNIORFLUX Barrel Pump KitJUNIORFLUX Barrel Pump Kit Flow RateUp to 56 l/minDischarge HeadUp to 8.5 mwcExternal Tube Diameter25 - 32 mmImmersion Length700, 1000 mmViscosity<1 - 250 cPsMax. Fluid Temperature45 °CPump Tube Materials (External)PolypropyleneDrive OptionsFEM 3070 Commutator Electric Motor FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. There are several pump tube lengths each designed specifically for the various drums and containers available on the market, the most common are 1000 mm for 205 l drums, 1200 mm for IBC's and 700 mm for smaller containers - 25 litre jerry cans, 100 litre tanks etc. FLUX F300 pump series has been designed for light - medium duties and low viscosity fluids up to 250 mPas/cPs, these range of pumps can also be supplied as a complete pump kit containing a discharge hose, hand nozzle and compression glands depending on the specific model, fume glands and foot strainers are also available upon request. The JUNIORFLUX pump kit is supplied with an electric single phase dual speed motor, (110V and 230V) these motors have an integrated overload cut-out switch for added operational safety, this transfer pump kit is supplied with a FP 314 PP sealless 700 or 1000 mm length pump, discharge hose, hand nozzle and electric commutator FEM 3070 motor, depending on the model these pumps can be supplied with three different external tube diameters (25, 28 mm) for containers with narrow inlet ports and 32 mm for higher flow rates - up to 56 l/min. Design Features/Benefits • Sealless pump in fluid section.• Compact and light design, with integrated ergonomic handle.• Highly engineered PTFE bearings.• Suitable for containers with small inlet ports/narrow-necked openings.• Dual speed single phase double insulated motors with overload cut-out switch• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Heavy duty chemical resistant ETFE impellers.• Available battery powered or with single phase (110V / 230V) electric motors Typical Fluids: • Battery acid• Ammonia water• Glycols• Sodium hydroxide• Soap solution• Boric acid• Phosphoric acid• Hydrochloric acid• Sulfuric acid (up to 80 %)• Fruit acids Kit Components: • JUNIORFLUX F 314 pump in polypropylene• Integrated commutator motor FEM 3070/230V50Hz/230 Watt• PVC hose - 2 m long• Hand nozzle in polypropylene

For more information on JUNIORFLUX Barrel Pump Kit For Wastewater talk to North Ridge Pumps Ltd