MINIFLUX Horizontal IBC/Container Emptying Pump Kit For Wastewater Treatment Industry

MINIFLUX Horizontal IBC/Container Emptying Pump KitFlow RateUp to 240 l/minDischarge HeadUp to 13 mwcExternal Tube Diameter 41 mmViscosity<1 - 1000 cPsFluid TemperatureStainless Steel 316: 0 - 100°C (0 - 40°C for ATEX Applications)Length136 mmConnectionsInlet: Union nut S60x6 / Discharge: G 1 ¼ APump Tube Materials (External)Stainless Steel 316Drive OptionsCommutator & Brushless Electric Motors, Compressed Air Motors and 3-Phase Gear Motor FLUX barrel pumps also called drum pumps are designed for transferring, emptying or dosing must existing fluids, from low to high viscosity products, these pumps are typically used for fluids that are supplied in containers such as 205 litre/45 gallon drums/barrels, 1000 litre containers called IBC's or Intermediate Bulk Container and also smaller containers 25 litre, 100 litre etc. By using a barrel pump we can avoid having to tip up the container in order to emptying it something than can often be quite dangerous and illegal thus using a drum/barrel pump is the safest and more efficient way of extracting liquid from a drum or container as wastage/spillage during the operation is next to nothing. The pumping action and operation of the barrel pumps is quite simple, the pump tube is inserted into the opening of the container (bunghole) which typically is a 2 inch aperture, once the pump tube is immersed in the liquid the pumping action is done by the rotation of an impeller which is fitted at the bottom of the pump, the rotating impeller pushes the liquid up, towards the pump tube outlet and out of the discharge side of the pump. The MINIFLUX pump kit comes with an electric 230V, 50Hz, 500W commutator motor, 2 metres of DN19 PVC hose and polypropylene hand nozzle as standard this extremely compact pump kit is designed for emptying IBC's with floor level openings/discharge ports, manufactured in stainless steel this particular unit is ideal for installations with height restrictions where there is not enough space to fit a standard pump on the top of the IBC, the MINIFLUX is typically used for transferring thin fluids as well as flammable liquids at low pressures, (13 metre water column), this pump is also ATEX (II 2G c IIB TX) certified. Design Features/Benefits • ATEX (explosion proof) certified - suitable for zone 1 applications.• Compact design - 136 mm in length with union nut S60x6 inlet and G 1 ¼ A discharge connections.• Can be used with a hand nozzle or pump against a close valve. (Only Temporarily)• Available with electric or air operated motors - Commutator or air motor are recommended.• Ideal for IBC's emptying or transfer applications and continuous operations.• Ideal for emptying IBC's with floor level openings/ports.• Can be easily connected/disconnected to IBC's outlet port via connecting nut. Typical Fluids: • Aqueous solutions• Cleaning agents• Flammable liquids• Lye and acids with low concentration• Solvents• Mineral oils• Raw cosmetic products Motors Available & Capacity: Commutator Motors: FEM 4070 Flow rate max. 215 l/min Discharge head max. 10 mwc Kit contains the following components: • Stainless steel 316 MINIFLUX pump.• Two metres of DN19 PVC hose.• Polypropylene hand nozzle.• Electric 230V, 50Hz, 500W commutator motor

For more information on MINIFLUX Horizontal IBC/Container Emptying Pump Kit For Wastewater Treatment Industry talk to North Ridge Pumps Ltd