North Ridge INV Flexible Impeller Pump For Liquid Oils

INV Flexible Impeller Pump Flow RateUp to 72m³/hrHead (Pressure)Up to 40mInlet/Outlet Sizes3/4" to DN100Operating TemperatureUp to 100°CViscosityUp to 50,000cpDrive OptionsElectric Motor, Inverter The INV series of flexible impeller pump comes complete with an external mounted control panel and inverter to control the motor/pump speed. The output speed can be reduced as low as 50RPM. The ability to change the speed and reduce is so significantly makes this series of flexible impeller pump extremely versatile. The INV range is excellent at transferring viscous fluids, shear sensitive fluids and fluids containing solids in suspension. Popular industries for this positive displacement pump include, food, beverage, chemical, cosmetic and pharmaceutical. A special version of the INV range comes installed with twin shafts and pumps heads, the two pumps are ran from a single motor. The 2H version is able to double the head output, while the 2Q version doubles the flow rate output. The standard INV version comes with the pump mounted on a trolley, complete with CE control panel, inverter and a remote control with 15 metres of cable. The control features are, On/Off, Reverse and speed adjustment. Additional features and accessories are available, including; 1) Waterproof wireless remote control with 100m range and charging station2) Additional 4-20 mA Connector3) Timing System This flexible vane pump can self-prime from dry and perform a suction lift up to 6m without the requirement of a non-return valve. The largest flexible impeller pump in the range can handle viscosities up to 50,000cp, viscosity capability varies depending on size of pump and motor speed. It is fully reversible and one of the most versatile pumps on the market. The delicate action of the rubber impeller is what creates the non-pulsating flow and allows delicate fluids to be handled. As the shaft within the pump rotates, the flexible impeller bends against the casing forcing the fluid and solids out of the discharge port. Materials of this flexible impeller pump can be customised to suit application requirements, The standard casing material is either stainless steel 304 or stainless steel 316 depending on model, stainless steel 316 is available for all models on request. The impeller can be supplied in various materials including NBR, Neoprene, EPDM, Silicon and Natural rubber depending on the nature of the fluid. Our INV flexible vane pumps are FDA approved for use in hygienic and sanitary applications and can be supplied with various connection types, including; DIN, BSP Male and Female, Triclover, SMS, RJT, Friederich, Garolla and Macron. Other variations of our flexible impeller pump are available to suit a wide range of applications, these include; bare shaft pump, electric motor, hydraulic motor, gear motor with pulley and mechanical speed variator. These variations can also be supplied on a mobile trolley and with a wide range of accessories including; control panel, bypass, barrel filling kit, carry handle, flow meter, dry run protection, pressure switch, level sensors, remote control and motor shroud. Common fluids for this flexible vane pump series include; wine, must, must and stemmed grapes, beer, fruit pulp, fruit juice, honey, liquid sugar, syrups, glucose, milk, melted butter, vegetable glycerine, yoghurt, eggs, oils, edible oils, water based glues, emulsions, wax, detergents, rubber later, inks, paints, waste water, black water, grey water, bilge water, sludge, slurries, soap, lotions, cream, shampoo and many more. To understand more about flexible impeller pumps, read more here. Product summary •Inverter driven flexible impeller pump•Twin pump head versions available•Self-priming up to 6m without the requirement of a non-return valve•Excellent for handling shear sensitive fluids due to the smooth non-pulsating flow•Viscosity capability of 50,000cp for the largest model•Up to 25mm solids handling capability depending on pump size. MINI - 3mm, MIDEX - 5mm, MINOR - 10mm, MAJOR - 15mm and MAXI - 25mm•Reversible via switch on the motor•Various impeller materials, including NBR, Neoprene, EPDM, Silicon and Natural rubber•Various connection types, including; DIN, BSP Male and Female, Triclover, SMS, RJT, Friederich, Garolla and Macron.•Pump casing is Stainless steel 304 as standard for the MINOR, MAJOR and MAXI models, Stainless steel 316 for the MINI and MIDEX (All models are available in stainless steel 316 on request)•Various pump head orientations depending on application requirements•Garolla connections are fitted to the MINOR, MAJOR and MAXI models as standard, BSP male for the MINI and MIDEX models•Integrated manual or spring-loaded bypass available for certain models•Motor options include 230V Single phase and 400V Three phase•Wide range of accessories available including; control panel, bypass, barrel filling kit, carry handle, flow meter, dry run protection, pressure switch, level sensors, remote control and motor shroud

For more information on North Ridge INV Flexible Impeller Pump For Liquid Oils talk to North Ridge Pumps Ltd