North Ridge PXF Series Triple Screw pump For Wastewater Treatment Industry

PXF Series Triple Screw pump Flow RateUp to 288m³/hrHead (Pressure)Up to 30 barInlet/Outlet SizesDN25 to DN250Operating TemperatureUp to 120°CViscosity10 to 5000cpDrive OptionsElectric Motor, Magnetic Drive The PXF series of triple screw pump is specifically designed for lubricating applications due to it's ability to work in low temperature environments and its ability to start up with high viscosity fluids. This largest pump in this range can produce high flow rates up to 288m³/hr and high pressures up to 30 bar. It can handle various fuel oils and lubricating oils not containing solids, ranging in viscosity from 10 to 5000cp. The compact design of this pump coupled with the suction and delivery ports mounted on top of the pump makes it excellent for applications with space limitations. It can also be mounted horizontally and vertically depending on customer's preference. Our screw pumps have numerous benefits over other positive displacement pumps such as gear pumps. They produce low noise levels, are compact as no gearbox is required, produce low pulsations, are excellent at self-priming and can handle fluids containing trapped air. This self-priming screw pump range is fitted with SAE flanges as standard, DIN and ANSI flanges are available on request. It can be fitted with a built-in relief valve for protecting the system from overpressure. This range is supplied with mechanical seal as standard but can be fitted with a magnetic coupling if required. The magnetic drive enables a completely maintenance and leak free solution for applications where this is a concern. The PXF series can be fitted with an Atex motor for installation in non-safe areas. It is marine type approved by ABS, BV and RINA and can be marine witness tested by various classification bodies if required. The PXF series of triple screw pump is manufactured in cast iron as standard but is available in carbon steel on request; it can be utilised for various applications within the marine and industrial markets. Some of the fuels and oils this range can handle include diesel (DO), Marine diesel oil (MDO), Low sulphur marine gas oil (LSMGO), Heavy fuel oil (HFO), lube oil and many more. Common applications include lubricating oil circulation, gear box lubrication, thruster lubrication, windmill blade lubrication and engine lubrication. Product summary •Suitable for a wide range of fuels and oils•Excellent for lubricating applications•Compact design•Top mounted suction and delivery ports•Excellent self-priming capability•Quiet low pulsation operation•Cast iron as standard, available in carbon steel on request•Nitrided steel screws•Low NPSH required•Available with SAE, DIN and ANSI flanges•Can be supplied with counter flanges•Can handle viscosities from 10 to 5000cp•Motor speeds between 750 and 3600RPM without the requirement of a gear box•Available with magnetic coupling for maintenance free and leak free operation•Can be mounted horizontally or vertically•Each pump is individually tested•Marine type approved by ABS, DNV and RINA•Marine witness testing available by various classification bodies•Can be fitted with pressure relief valve•Single phase and three phase 50hz / 60hz motors•Mill material certificates available, according to UNI EN 10204.•Can be supplied with Atex motor Read more about Screw Pump design in our guide

For more information on North Ridge PXF Series Triple Screw pump For Wastewater Treatment Industry talk to North Ridge Pumps Ltd