XMI Centrifugal Process Vertical Multistage Immersion Pump - Test Rig Pumps Apllication

XMI Centrifugal Process Vertical Multistage Immersion Pump Flow RateUp to 400m³/hrHead (Pressure)Up to 220mInlet/Outlet SizesDN32 to DN150Operating TemperatureUp to 95°CDrive OptionsElectric Motor The XMI process centrifugal vertical multistage immersion pump can be used for a wide range of applications in the industrial and marine markets. This vertical multistage cantilever pump is designed to transfer clean or slightly contaminated low to medium viscosity fluids without the presence of fibrous or solid particles. Common fluids pumped include fresh water, grey water, sea water and fuels (diesel, petrol and kerosene) and common applications include fuel transfer, chemical, energy plants, mining, fire fighting, irrigation, water supply, water treatment, pressurisation, grey water, dewatering, and marine. The centrifugal multistage cantilever pump head sits at the end of a column and is submerged in the fluid while the motor is dry and situated outside the fluid. The multistage process vertical immersion pump design has many benefits: Due to the multistage design, this pump is capable of achieving pressures up to 22 bar. This sump pump can be supplied with a column length up to 4m for the most challenging of installations. The motor is situated outside the fluid allowing higher temperature fluids to be pumped without concern of the motor overheating.Gland packing sealing is installed as standard, however a mechanical seal can be installed if required. The XMI process centrifugal vertical multistage immersion pump is also available in an ATEX version for handling flammable fluids or being installed in a non-safe area. Product summary •Can handle contaminated low to medium viscosity fluids•Capable of pressures up to 22 bar•Multistage cantilever pump design•Gland packing as standard, mechanical seal can be installed if required•Column length up to 4m•Maximum fluid temperature of 95°C•Available in cast iron, cast steel and other materials upon request•Suction and discharge flanges conform to EN 1092-2 / PN 16. Flanges according to EN 1092-1 / PN 16 for steel and stainless steel casings. If required, ANSI/ASME flanges can be supplied.•Single phase and three phase 50hz / 60hz motors. IP55 as standard.•ATEX version upon request•Independent certification is available upon request•All impellers are balanced according to ISO 1940 class 6.3•Bearings are normally grease lubricated

For more information on XMI Centrifugal Process Vertical Multistage Immersion Pump - Test Rig Pumps Apllication talk to North Ridge Pumps Ltd