XMZ End Suction Horizontal Centrifugal Multistage Pump - Test Rig Pumps Apllication

XMZ End Suction Horizontal Centrifugal Multistage Pump Flow RateUp to 400m³/hrHead (Pressure)Up to 450mInlet/Outlet SizesDN40 to DN150Operating Temperature-10°C to +140°CDrive OptionsElectric Motor The XMZ end suction horizontal centrifugal multistage pump can be used for a vast range of applications in the industrial and marine markets. This end suction multistage pump is designed to transfer low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include boiler feed, chemical, energy plants, mining, fire fighting, reverse osmosis, water treatment, pressurisation, dewatering, building systems, marine and cooling/heating conditioning (HVAC), petroleum, irrigation and water supply. This end suction centrifugal multistage pump is capable of high pressures up to 45 bar and flow rates of up to 400m³/hr and is also very robust due to additional bearings being installed in the pump head, these remove strain away from the motor during operation. The horizontal centrifugal multistage design has many benefits: The pump is an end suction design; however the discharge flange can be positioned on top or either side depending on customer requirements. Multiple closed impellers and diffusers are installed to allow it to achieve very high pressures. This multistage pump has a maximum casing pressure of 63bar. It is fitted with sacrificial wear rings which are replaced periodically, this means the casing and impellers are protected from premature wear. The XMZ end suction horizontal centrifugal multistage pump is also available in an ATEX version for handling flammable fluids or being installed in a non-safe area. If required, the XMZ end suction horizontal centrifugal multistage pump can be supplied with an external air powered or electric priming pump for applications where a suction lift is unavoidable. Product summary • Can pump a wide range of clean low viscosity fluids• Discharge flange can be positioned on the top or either side of the casing• Maximum fluid temperature of 140°C• Independent pump and motor shafts• Fitted with sacrificial wear rings which are replaced periodically• Available in cast iron, 316 stainless steel, duplex stainless steel, bronze and other materials upon request• Suction flanges conform to EN 1092-2 / PN 16 and the discharge flanges according to EN 1092-2 / PN 40 (PN 63). If required, ANSI/ASME flanges can be supplied.• Gland packing or mechanical seal options available• Single phase and three phase 50hz / 60hz motors. IP55 as standard.• ATEX version upon request• Independent certification is available upon request• Manufactured in accordance with standard BB4 / EN ISO 9905• All impellers are balanced according to ISO 1940 class 6.3• Long coupled with baseplate• Bearings are greased• Can be supplied with an air powered or electric priming pump

For more information on XMZ End Suction Horizontal Centrifugal Multistage Pump - Test Rig Pumps Apllication talk to North Ridge Pumps Ltd