XVHC Vertical Centrifugal Pumps For Wastewater

XVHC Vertical Centrifugal Pump Flow RateUp to 1400 m³/hrHead (Pressure)Up to 100 mInlet/Outlet SizesDN32 to DN250Operating Temperature-10°C to +140°CDrive OptionsElectric Motor The XVHC vertical single stage centrifugal pump can be used for a wide range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include fuel transfer, chemical, energy plants, mining, fire fighting, irrigation, water supply, water treatment, pressurisation, grey water, dewatering, building systems, marine and cooling/heating conditioning (HVAC). This is a large heavy duty inline vertical centrifugal pump and is capable of high flow rates up to 1400m³/hr. This vertical centrifugal pump has many benefits: The compact vertical centrifugal configuration means the pump can be installed where there are space limitations. The back pull out design allows the motor to be removed while the pump is still connected to the pipework, this in turn allows time saving while the pump is serviced/maintained. The centrifugal pump and motor have independent shafts, this means that only the pump shaft will need to be replaced in the event of it breaking. Other less robust vertical centrifugal pumps on the market only use the motor shaft, this means that if the shaft breaks, the entire motor needs to be replaced A lantern bracket is installed between the pump and motor, this means that there is a space between the pump and motor, this in turn protects the motor from fluid ingress in the case of a seal failure. Wear rings can be installed in the vertical pump head, this is a sacrificial part that wears first protecting the impeller and casing from wear and prolonging the life of these parts and therefore the pump. The XVHC vertical centrifugal pump is also available in an ATEX version for handling flammable fluids or being installed in a non-safe area. If required, the XVHC inline vertical centrifugal pump can be supplied with an external air powered or electric priming pump for applications where a suction lift is unavoidable. Product summary • Can pump a wide range of clean low viscosity or slightly contaminated fluids• Vertical design• Back pull out design to ensure quick and easy maintenance• Maximum fluid temperature of 140°C• Independent pump and motor shafts• Available in cast iron, 316 stainless steel, duplex stainless steel, bronze and other materials upon request• Suction and discharge flanges conform to EN 1092-2 / PN 16. Flanges according to EN 1092-1 / PN 16 for steel and stainless steel casings. If required, ANSI/ASME flanges can be supplied.• Single phase and three phase 50hz / 60hz motors. IP55 as standard.• ATEX version upon request• Independent certification is available upon request• Casing wear rings to prolong casing and impeller life• Low NPSH• Manufactured in accordance with standard EN 733• Bearings are greased for life• Can be supplied with an air powered or electric priming pump

For more information on XVHC Vertical Centrifugal Pumps For Wastewater talk to North Ridge Pumps Ltd