Add My Company
Sign In
GA0000 - PY-FN Oxy/Propylene cutting nozzle
Product Code: GA0000
The PY-FN cutting nozzle has been designed by Noz-Alls following the increase in demand for small propylene sets. The typical 'FN' setup only ever catered for use with acetylene. Not any more!
We have produced the first ever readily available, professionally produced propane cutting nozzle that is designed to fit into the light weight shank cutting attachment. This cutting nozzle is available in 3 sizes, 0.8, 1.2 and 1.6mm which will allow for a cutting range from 3mm through to 50mm.
All PY-FN nozzles come marked with cutting ranges - all you need to do is screw them into the end of your torch, tighten lightly with a spanner and cut your metal.
It should be noted that with the PY-FN there is no need for the retaining nut that you would normally use with acetylene versions. Noz-alls always recommend keeping this retaining nut safe should you wish to convert from propane / propylene to acetylene.
We have produced the first ever readily available, professionally produced propane cutting nozzle that is designed to fit into the light weight shank cutting attachment. This cutting nozzle is available in 3 sizes, 0.8, 1.2 and 1.6mm which will allow for a cutting range from 3mm through to 50mm.
All PY-FN nozzles come marked with cutting ranges - all you need to do is screw them into the end of your torch, tighten lightly with a spanner and cut your metal.
It should be noted that with the PY-FN there is no need for the retaining nut that you would normally use with acetylene versions. Noz-alls always recommend keeping this retaining nut safe should you wish to convert from propane / propylene to acetylene.
For more information on GA0000 - PY-FN Oxy/Propylene cutting nozzle talk to Noz-Alls Ltd
Enquire Now
List your company on FindTheNeedle.