Sign In
Welding Torch Exhaust VacuFil 125
For permanent use with automatic volume flow adjustment
The Kemper VacuFil 125 is for a single work station and is a high vacuum extraction unit for large quantities of welding fume and dust and is designed for permanent use with torch integrated extraction during welding as it has automatic filter cleaning. The VacuFil 125 makes use of a side channel compressor for vacuum generation which ensures robust performance expected by industrial users. The automatic volume flow adjustment makes sure that the optimum operating point is maintained for a wide variety of flue gas extraction torches - See the Noz-Alls range of MIG torch extraction as they are not as clumsy or bulky as others on the market plus they extract fume properly.
The Kemper VacuFil 125 is designed for:-
High levels of smoke and dust
Non-stop operation
Torch extraction
Best health protection for employees through the use of KemTex® ePTFE
filter cartridges with surface filtration
Advantages of the Kemper VacuFil 125
Simple and precise flue gas extraction torch selection via touch display with automatic volume flow adjustment
Uninterrupted continuous operation due to automatically controlled filter cleaning
Fleet management, remote maintenance and pre-noise maintenance using autarkic networking via mobile radio to the KEMPER cloud
Key Technical Features
Automatic filter cleaning, pressure-controlled
Side channel compressor
KemTex® ePTFE filter cartridges
KEMPER-Cloud connection via mobile radio
Contamination -free dust disposal in one-way containers.
Control via touch panel
Filter
Filter Stages
1
Filter Technology
Cleanable Filter
Filter Cleaning Method
Rotating nozzle
Filter surface
4 m²
Type of filter
Filter cartridge
Filter material
ePTFE membrane
Filter efficiency
99.9%
Dust classification
M
Extraction capacity
125 m³/h
Dimensions (w x d x h)
635 x 885 x 1160 mm
Weight
120kg
Motor power
1.5kWatts
Power supply
110V or 230V or 415 V at 50 Hz
Rated current
230V = 5.8 Amps
Noise level
66dB (A)
Fan type
Side channel blower
Compressed air supply
6 bar
Hose connection
45mm dia.
Our quick video clip shows welding with the Holch torch extraction "on" followed by the Kemper MiniFil vacuum having been turned "off" so you see the normal fume as a direct comparison, then the Vacuum turned back "on" the close up didn't work as my stills camera doesn't refocus easily. We will reshoot later. The Headux 250C Welder was operating at 230 Amps welding with 1,0mm mild steel ESAB G3Si MIG wire with the wire speed at 16,5 m/ min.
The Holch MIG torch is the MHS350 air cooled version which has the same front end as the water cooled MHS 450.
For more information on Kemper VacuFil 125 On Torch Welding Fume Extractor For High Industrial Usage talk to Noz-Alls Ltd
Enquire Now
List your company on FindTheNeedle.