Noz-Alls ANM -6 Cutting Nozzle - Oxy/Acetylene

ANM-6 Cutting Nozzle - All Sizes Available Standard British style nozzle mix cutting nozzles 75mm long with the larger barrel diameter. Our ANM-6 cutting nozzles exhibit good backfire resistance. Each of our nozzles will be capable of turning down to 50% flow and remain stable in use. Please note that our ANM-6 cutting nozzles have different pre-heat flows for each nozzle size to ensure the heat output is correct for the thickness being cut. The size 3/32" is the largest that may be used on s single large industrial Acetylene cylinder due to the flow rate of acetylene. Noz-Alls Noz-Alls ANM-6 (Acetylene Nozzle Mix - 6 pre-heat cones) cutting nozzles have the traditional large tip diameter for maximum heat dissipation. These ANM cutting nozzles are easy to work with because they exhibit good resistance to backfire combined with focused pre-heat flame cones which are essential qualities required for initiating and maintaining the cutting process thereby giving you the confidence to work quickly and efficiently without experiencing operating problems. Noz-Alls Produced to Noz-Alls own drawings we know that our ANM nozzles work safely and effectively giving you a safer and longer lasting nozzle compared to cheap versions that you can find in the market. Ensure that you complete your kit with something that works. Our ANM-6 cutting nozzles have the original larger barrel diameter which is 15.4 - 15.6 mm plus our nozzle length is the original 75mm which helps provides the optimum performance. For your safety and that of those around you it is important that you do not use ANM-6 cutting nozzles on small / medium size acetylene cylinders (PortaPak / "J" size) this is because the ANM-6 nozzle even the smallest size 1/32" will draw off too much acetylene therefore it is important to use only the AFN / ASFN cutting nozzle range with small and medium size DA cylinders. From regulators, flash back arrestors, hoses, quick connectors and torches, we have everything you could possibly need to go with your nozzles. Please feel free to browse in the related products section as well as the rest of our website. The ANM range cuts from 3mm to 300mm. Please see our size information table below.Nozzle Size(Inch)NozzleSize(mm)CuttingThickness(mm)AcetylenePressure(bar)OxygenPressure(bar)1/320.83-60.31.53/641.25-120.351.8-2.21/161.610-750.42.6-3.55/642.070-1000.43.13/322.490-1500.42.8-3.27/642.8140-2000.453.1-3.71/83.2190-3000.454.5-6.2 ANME's also cut the same range but offer a longer tip with increased backfire resistance. We also offer an ANME in a long taper version to help with cutting vision. To cut more than 300mm please see our 'Heavy Duty ANME' in the related products section. 0700143016, 0700143017, 0700143018, 0700143019, 0700143020, 0700143022

For more information on Noz-Alls ANM -6 Cutting Nozzle - Oxy/Acetylene talk to Noz-Alls Ltd