PROTECT UVR HIGH GLOSS TOPCOAT

Two Pack Epoxy High Gloss Topcoat for a High Gloss Finish Why do we apply topcoats to our precious metal when most of the substrate's protection comes from the primer and mid coats? Topcoats are applied for a number of reasons, including choice of colour, choice of sheen (gloss), and adding an extra level of protection to the previous coats. Rustbuster Protect UVR?is superior to other epoxy topcoats in that it offers a higher level of colour quality and sheen retention. Unlike traditional epoxies and conventional paints, this colour and sheen won't fade over time and exposure to UV light. Traditional epoxies tend to chalk over time when exposed to UV light and lighter colours can yellow when hidden from UV light. It's a tricky balancing act! Well not any more, as Protect UVR is both UV stable and non yellowing. Protect UVR is an extremely high performance two pack high gloss VOC compliant epoxy acrylic finish, providing an excellent topcoat for any of our epoxy primer systems, including EM121, Custom 421, Zinc Rich Epoxy Anode etc. This topcoat can be used over them all. The standard colour is black but you can enquire about any other colour in RAL or BS standard colours. Non-isocyanate. Colour and gloss retention superior to standard epoxy coatings and topcoats. Non chalking. Non yellowing. Long pot life but quick drying. 54% volume of solids. Theoretical spreading rate 10 m2 per litre. Recommended dry fill thickness 60 um. ? Product description High performance two pack high gloss VOC compliant epoxy acrylic finish, providing an excellent topcoat for any of our epoxy primer systems.? Pack description Kits are supplied complete with the colour (component A), the hardener (component B) and thinner, as well as two mixing cups. Custom colours are supplied as a minimum 5 ltr kit. Exact quantities can vary slightly in the colour tinting process. Application temperature Can be applied to steel as low as -5c. The steel must be at least 3 degrees above the current dew point. (See our?dew point calculator.) Thinning Use only the epoxy thinner supplied. Application Brush or spray. Spraying Nozzle 1.0mm to 1.5 mm. Pressure 0.3 - 0.4 MPa (approx. 3 - 4 bar, 44 - 58 psi). Pot life Pot life?is the time from mixing the two components together to the point at which the mixed?paint?is no longer useable. You have 2.5 hours pot life once mixed at 20c ? longer at colder temperatures. Shelf life We recommend storing upside down in a dry place at around 20c. In these conditions the product has a shelf life of 12 months. Do not store below 20c as this can affect performance. Disposal Allow the mix to cure in your mixing cup and throw away as dry waste. Cleaning Clean up with standard thinner or gun wash. Do not thin the paint with standard thinner as this will affect the paint cure. Safety This is a solvent borne paint and care should be taken to avoid spray mist or vapour as well as contact between the wet paint and exposed skin and eyes. Avoid at all times inhalation of the spray mist by using a vapour cartridge respirator. Use suitable protective clothing, spray suit, gloves and goggles.

For more information on PROTECT UVR HIGH GLOSS TOPCOAT talk to Rustbuster Ltd