Spray Transfer Mig Welding

This is achieved at higher voltage settings and is where the filler wire is melted and transfers in globules to the weld pool. Spray transfer offers smoother welds with little welding spatter but cannot be used in position. The Mig Welders power is usually adjusted in steps and it is the welding arc Voltage that is adjusted NOT the welding Current (amps). The welding arc current will be determined by the combination of welding Voltage that has been set and the welding wire diameter. The greater the Mig welding wire, the more welding current will flow and, therefore, the greater the heat input. Larger diameter welding wire will also allow larger welds to be produced.

For more information on Spray Transfer Mig Welding talk to Saint Anns Sheet Metal Co. Ltd