Linear Encoders

A superlative measurement accuracy over the full measurement range. :: A choice of stroke length (12, 25, 50 & 100mm/0.5, 1, 2 & 4 inch). :: Spring push, pneumatic, free motion and motor drive actuation. :: Mechanical compatibility with standard gauge probes. :: Robustness and reliability. :: Direct, immediate readout in mm or inches. :: The power of the Orbit Network: allows simple, modular network system construction so you can be up and running in minutes. You can combine Digital Probes, Linear Encoders and other digital modules to suit your individual applications. It also eliminates the bulky and complex cabling of conventional probes. :: The distance capability (probe-to-computer) of up to 1km without degradation in performance (Orbit). :: Network capability (Orbit). :: Compatibility to industrial standards (Sine wave). :: Calibration certificates in mm or inches. :: CE marked as fully compliant to EN50081 and EN50082-2. System configuration The Linear Encoder consists of the probe head and the Probe Interface Electronics (PIE) which can be connected directly to a Solartron Digital Readout, a PC or a PLC via Solartron Metrology's Orbit Network System. Alternatively, sine wave output variants are available and allow full compatibility with all existing systems. A standard industrial plug replaces the PIE. Probe head The Linear Encoder probe head contains a high-accuracy optical scale, together with a precision mechanical bearing assembly. For maximum accuracy, a fused quartz glass substrate is used to minimise temperature effects, giving a very high level of performance over the full stroke. A reference mark is included on the scale to facilitate absolute measurement. Probe Interface Electronics (PIE) - Orbit Versions Only Housed in a custom designed connector, the Probe Interface Electronics convert the signal from the probe into a digital format (Orbit). PIE connectors can be plugged straight into the Digital Readout or clipped together using the T-con. Sine wave output An industry standard connector is used for the voltage and current outputs. This enables the sine wave Linear Encoder to connect to Solartron Metrology's IBox and any industrial standard electronic interface.

For more information on Linear Encoders talk to Solartron Metrology Ltd