Immersion Heater Controller for moble hot water system

V11M IHC TP The V11 Mains Immersion Heater Controller (Temperature Probe) is Spring’s solution to controlling the water temperature within a large tank. The controller allows the user to set a desired temperature between 15°c and 70°c, once this is set the controller will then turn on the immersion heater until the water has reached the desired temperature. The temperature of the water is measured by a temperature probe placed inside the tank and connected to the controller. This controller features a safety cut-off. When the water level goes down below a safe level detected by a float switch the immersion heater will be switched off. The main features of this controller are: Powered by 230VAC mains Controls 230VAC 3KW heater element Indicates water temperature Allows user to change desired temperature from 15-70°c Low water detection with safety cut-off IP65 case To set temperature press and hold the down and enter buttons until tP is shown, then use the up and down buttons to choose desired temperature.

For more information on Immersion Heater Controller for moble hot water system talk to Spring (Europe) Ltd