Tripod - Aluminium Telescopic 2-Way with 3D Safety Adapter

A tripod- flexible as never before: Raise your scanner into the upward or wind it down. The tripod allows not only scanning in a height of 4.00m (157.5 in), but also overhead scanning of shafts, for instance. The main rod has a support plate with a 5/8 inch connection. Depending on the measuring task, the support plate can be connected upright or head first. Then, the 4 provided extension tubes are inserted at the further end and secured. Thus, you can crank your scanner upwards or downwards on and on. The 3D safety adapter is applied for overhead applications. With this product, you can easily and safely scan overhead. The special adapter allows an easy assembly and safe support. The best protection of your valuable measuring instruments. Designated use: scanner usable over several heights- without assembly, disassembly and modification enlargement of the possible scanner positions overhead scanning Product characteristics- 2-way telescope tripod: Tripod: 5/8 inch connection Indirect crank drive with enhanced gear unit The crank drive can be operated by means of a crank or a screwdriver. Anti-twist geared column Additional leg braces for more stability Solid and quick locking mechanism Spirit level Set of shoes for tripod can be used on various surfaces Minimum effective depth: approx. -4.50m below the earth's surface Maximum useful height: approx. 4.00m Transport length: approx. 1.28m Weight: approx. 10kg Flat support plate with 110mm Single telescope Telescope lift: 818mm During long-term usage, the scanner's weight should not be higher than 20kg. 4 extension tubes (each 1m) in a robust transport case included Suited for all scanners with 5/8 connection Product characteristics - 3D safety adapter: One part of the 3D safety adapter is screwed on the original base plate of the scanner. The other part of the adapter is screwed on the tripod with a 5/8 inch connection. The part of the adapter and the scanner can easily be inserted in the correspondent part fixed at the tripod. Then, it can be secured by means of a safety pin. Weight: 200g Dimensions: 100mm x 105mm x 100mm Compatible laser scanners: FARO Focus3D und Focus3D X 330,Trimble TX5 Z+F IMAGER 5006 Leica HDS 6000 A tripod - flexible as never before: Raise your scanner upward or wind it down. The tripod allows not only scanning to a height of 4.00m, but also overhead scanning of shafts, etc.

For more information on Tripod - Aluminium Telescopic 2-Way with 3D Safety Adapter talk to Sunbelt Rentals Survey