MicroJig GRR-RIPPER Complete

MicroJig GRR-RIPPER Complete

The GRR-RIPPER® Complete is an all in one package for ultimate control, precision, and safety. The package includes a GRR-RIPPER® Advanced 3D Pushblock, and one of every accessory we make for it. It’s everything you need to experience the full range of functionality that only the GRR-RIPPER® can offer.

Three directions of force provide essential stability for superior precision, safety, and control.

• Downward pressure stabilizes work piece on a flat surface.
• Inward pressure against the fence virtually eliminates kickback.
• Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.

Eliminates kickback on table saws. Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.

Rip without stopping and burning. Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing

Using in Table saws: The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼�? x ¼�?. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

Using in router tables: The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

Using in Jointers: The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. The GRR-RIPPER makes proper face-jointing technique easy, and safe.

Using in band saws: The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

MicroJig GRR-RIPPER Complete features

• The 1/8�? Leg allows you to rip thin strips down to ⅛�?, safely and repeatably. Excellent for edge banding, models, or decorative inlays.
• The Gravity Heel Kit comes with 5 dynamic sacrificial heels and mounting hardware. They automatically retract mid-board, and drop down to hook the tail end of the workpiece. The specially formulated plastic material allows them to be cut, providing support to prevent tearout.
• The included Stabilizing Plate provides 250% more stabilizing surface with two additional points of contact. It keeps the workpiece locked tight to the fence and parallel to the blade.
• The included Adjustable Spacer gives you 54% more gripping surface for controlling larger workpieces. Adjustment slots provide clearance for exposed router bits while maintaining a flat edge on the fence
• The Handle Bridges distribute downward pressure evenly for greater control and safer cuts. You’ll notice the difference.
• The Deflector / Connector acts as a barrier between your hands and spinning blades while deflecting chips and debris. It also connects to GRR-RIPPERs equipped with Handle Bridges. Two GRR-RIPPERs means twice the control while working with larger workpieces.

Product video

Include: 

• Main body
• 1/2" Leg
• 1/4" Leg
• Center Leg
• Handle
• Balance Support
• Hardware
• All Accessories: Stabilizing Plate, Adjustable Spacer, Deflector / Connector, �?Handle Bridge Kit, �?Gravity Heel Kit, �?1/8�? Leg

For more information on MicroJig GRR-RIPPER Complete talk to Tools House