Cosy Floor Kit 4 Easy Installation warm water under floor heating kit for up to 20m2 floor

Cosy-floor Kit 4 A single room DIY warm water underfloor heating Kit ideal for conservatories and small extensions, This floor heating Kit is suitable for conservatories from 10M2 to 15M2 . This is a fully pumped and temperature controlled Under floor heating Kit and requires limited Plumbing and Electric Wiring skills. This Kit can be added to an existing wet heating system and the will operate at the lower water temperature required for underfloor heating without changing the temperature of the existing system. The floor heating Tubing should be installed on top of good quality floor insulation and covered by a sand and cement screed normally 4 Sand/1Cement. Floor finish should be as Ceramic Tiles, Slate etc. This underfloor heating Pack includes:- *100 metres 16mm OD High temperature Pert- Al – Pert Pipe which is tested and approved for temperatures and pressures well above those required for floor heating. The pipe has a 100% oxygen barrier. Click for tube specification * One Reliance Compact UFH control unit click for specification * 200 push in pipe clips * Fittings to join 16mm pipe to 15mm copper pipe. *25 metres 8mm x 130mm edge insulation. * Installation Manual The tubing must be cut with a pipe cutter and re rounded using a plastic reamer. So as not to financially penalize regular users we don’t include these items in this Under floor heating Kit. If you don’t already have these items they can be purchased from our Tool Section Below is guide to area covered by 100 met. floor heating tubing at varying centres :- 200mm Centre to Centre = 20 square metres 175mm Centre to Centre = 17.5 square metres 150mm Centre to Centre = 15 square metres 125mm Centre to Centre = 12.5 Square metres 100mm Centre to Centre = 10 Square metres For high heat loss areas like conservatories we would recommend tube spacing of no more than 150mm centre to centre. This system should be controlled by a room thermostat , if operating along with the existing time clock a standard room thermostat would do . If operating independent of existing time clock we would recommend a programmable room thermostat. For more information and prices visit control section If you require any technical help please don’t hesitate to contact us Download an installation manual Weight 18.8 KG Avg rating: Not yet rated Our Price: £ 308.00 (£354.20 inc VAT)

For more information on Cosy Floor Kit 4 Easy Installation warm water under floor heating kit for up to 20m2 floor talk to Total Floor Heating Ltd