![Find The Needle](/theme/images/logo.png)
Sign In
Amprobe TELARIS ProInstall-75 Multifunction Tester
Product Code: ProInstall-75-UK
![Amprobe TELARIS ProInstall-75 Multifunction Tester](https://images.findtheneedle.co.uk/findtheneedle/products/16151905.jpg)
Looking for more info about Amprobe TELARIS ProInstall-75 Multifunction Tester?
TELARIS® ProInstall-75-UK Combined installation measurement equipment designed specifically for the UK market. Used for verification of the safety of electrical installations in domestic, commercial and industrial applications. Check and confirm that fixed wiring is correctly installed and compliant with IEC 60364 and BS7671 17th Edition wiring regulations. The ProInstall-75-UK is efficient to use by allowing the user to measure loop impedance without tripping RCDs, eliminating the need to bypass them. Slim reach probes allow you to keep your eyes on the panel while probing hard to reach areas. With simple operation for fast, easy testing, a large illuminated display with a wide viewing angle, padded neck strap, and a compact, ergonomic design, this tester is comfortable enough to use for all day testing. Functions Voltage & Frequency Wiring polarity checker Insulation Resistance Continuity & Resistance Loop & Line Resistance Prospective Earth Fault Current (PEFC/IK) Prospective Short-Circuit current (PSC/IK) RCD switching time, tripping level (ramp test), variable current Automatic RCD test sequence Test pulse current sensitive RCDs (Type A) Phase Sequence Indicator Product highlights Fast high current loop test (high current mode) Advanced loop testing prevents RCDs from tripping Variable RCD current mode for customized settings Zero adapter for easy test lead compensation PASS/FAIL indicator takes the guesswork out of RCD testing Insulation test voltages for a variety of applications Select voltage measurement quickly and easily between L-N, L-PE, and N-PE Dual display gives simultaneous readout of mains voltage and frequency Time saving auto-null feature subtracts lead resistance from measurements, and stores it in memory even after powering down High resolution measurements down to 0.01 ohm for a high level of accuracy Detachable leads for easy replacement Included accessories: Test lead set, alligator clips, test probe, ProInstall-TL-Kit remote test probe/tips, TL-75 fused test probe, zero-adapter, soft case with carrying strap, carry strap for neck/waist Safety cert.: DIN VDE 0411/EN61010/IEC61010 DIN VDE 0413/EN61557/IEC61557Measurement category CAT III/500 V, CAT IV/300 VPollution degree 2Protection category IP 40Power supply 6 x battery 1.5 V, IEC LR6Dimensions 110 × 260 × 130 mmWeight approx. 1500g (incl. batteries
Please contact us for more information about Amprobe TELARIS ProInstall-75 Multifunction Tester.
TELARIS® ProInstall-75-UK Combined installation measurement equipment designed specifically for the UK market. Used for verification of the safety of electrical installations in domestic, commercial and industrial applications. Check and confirm that fixed wiring is correctly installed and compliant with IEC 60364 and BS7671 17th Edition wiring regulations. The ProInstall-75-UK is efficient to use by allowing the user to measure loop impedance without tripping RCDs, eliminating the need to bypass them. Slim reach probes allow you to keep your eyes on the panel while probing hard to reach areas. With simple operation for fast, easy testing, a large illuminated display with a wide viewing angle, padded neck strap, and a compact, ergonomic design, this tester is comfortable enough to use for all day testing. Functions Voltage & Frequency Wiring polarity checker Insulation Resistance Continuity & Resistance Loop & Line Resistance Prospective Earth Fault Current (PEFC/IK) Prospective Short-Circuit current (PSC/IK) RCD switching time, tripping level (ramp test), variable current Automatic RCD test sequence Test pulse current sensitive RCDs (Type A) Phase Sequence Indicator Product highlights Fast high current loop test (high current mode) Advanced loop testing prevents RCDs from tripping Variable RCD current mode for customized settings Zero adapter for easy test lead compensation PASS/FAIL indicator takes the guesswork out of RCD testing Insulation test voltages for a variety of applications Select voltage measurement quickly and easily between L-N, L-PE, and N-PE Dual display gives simultaneous readout of mains voltage and frequency Time saving auto-null feature subtracts lead resistance from measurements, and stores it in memory even after powering down High resolution measurements down to 0.01 ohm for a high level of accuracy Detachable leads for easy replacement Included accessories: Test lead set, alligator clips, test probe, ProInstall-TL-Kit remote test probe/tips, TL-75 fused test probe, zero-adapter, soft case with carrying strap, carry strap for neck/waist Safety cert.: DIN VDE 0411/EN61010/IEC61010 DIN VDE 0413/EN61557/IEC61557Measurement category CAT III/500 V, CAT IV/300 VPollution degree 2Protection category IP 40Power supply 6 x battery 1.5 V, IEC LR6Dimensions 110 × 260 × 130 mmWeight approx. 1500g (incl. batteries
Please contact us for more information about Amprobe TELARIS ProInstall-75 Multifunction Tester.
For more information on Amprobe TELARIS ProInstall-75 Multifunction Tester talk to Warwick Test Supplies Ltd
Enquire Now
List your company on FindTheNeedle.