1.2363 Tool Steel

Uk deliveries. Contact our well informed sales team. 1.2363 X100CrMoV5-01 is a air hardening cold work tool steel, which offers high surface hardness after heat treatment, good wear resistance, great through hardenability. 1.2363 X100CrMoV5-01 tool steel is also characterised by its high dimensional stability after heat treatment, high compression resistance and good resistance to tempering.1.2363 X100CrMoV5-01 Forging:Heat slowly and uniformly to 700?C. Forge within a range of 1050/1100?C, reheating if necessary. Cool very slowly (preferably in a furnace) to avoid setting up stresses. Annealing: Heat uniformly to 850?C, equalise, then furnace cool. (Hardness about 215 Brinell). Fully machined 1.2363 components should be packed during annealing. Stress Relieving: If machining operations have been heavy or if the 1.2363 component has an unbalanced section, remove stresses before hardening by heating up to 675?C, equalise, then cool in furnace to 500?C before slowly cooling in air. Hardening: Pre heat to 600/700?C and thoroughly soak. Continue heating to the final hardening temperature of 950/980?C. Allow sufficient time for the 1.2363 tool to be heated through. Quench in oil or cool in air. Martempering: Martempering is an alternative hardening procedure which may be used when suitable salt bath equipment is available. Tempering: Heat uniformly and thoroughly at the selected tempering temperatures and hold for at least one hour per inch of total thickness.

For more information on 1.2363 Tool Steel talk to West Yorkshire Steel Co Ltd