Metrel MI3108ST EurotestPV Solar PV Tester - Standard Kit

Metrel MI3108ST Eurotest PV Solar & Electrical Installation Tester

The Metrel MI3108ST EurotestPV is a photovoltaic and electrical safety tester capable of testing electrical installations according to EN 61557 standards and solar PV installations to EN 62446 requirements. In addition, the Metrel MI3108 PV tester also includes I-V curve characteristics, calculation of STC values and power measurements on both AC and DC sides of the inverter, allowing efficiency to be calculated.

PV Installation Testing Features:

• Calculation of STC values
• Solar PV generator and inverter efficiency calculations
• Graphical representation of the module’s I-V curve, giving array performance verification
• Establish solar PV array behaviour under changing irradiance and temperature conditions
• Two voltage and current channels for simultaneous AC and DC measurements
• PV Safety Probe allows safe direct connection and disconnection with PV arrays

Electrical Installation Testing Features:

• Automated RCD testing complete with B Type RCD testing
• Earth resistance measurement
• Built-in fuse tables for automatic evaluation of line/loop impedance results
• Online monitoring of all 3 voltages
• Scope function
• Non-trip loop impedance testing
• One-phase power and energy measurements including harmonics up to the 11th
• Built to cope where voltages exceed 100V and currents of 10A DC are common

Suitable for the initial and periodic testing of both single and three-phase electrical systems, the Metrel MI3108ST EurotestPV tester is also ideal for continued performance evaluation and troubleshooting of photovoltaic installations and generators.

The Metrel EurotestPV Photovoltaic and Electrical Installation Tester offers a large internal memory capable of storing up to 1800 electrical test results or 500 I-V curve or Scope measurements. These can then be swiftly downloaded using supplied EuroLink PRO software for review, further analysis and the creation of test reports.

Complete with onscreen help and connection diagrams, a built-in charging circuit and probes for measuring solar irradiance and module temperature, the Metrel MI3108PR Eurotest PV Tester is a combined 17th Edition Multifunction Tester and PV Installation Tester that provides the complete test solution to the PV market.

For more information on Metrel MI3108ST EurotestPV Solar PV Tester - Standard Kit talk to www.test-meter.co.uk