T&R PCU2 mk5 Primary Current Injection Test System

T&R PCU2 mk5 Primary Current Injection Test System

The PCU2 Mk5 Primary Current Injection System is suited to commissioning and maintenance testing where very high currents are required. The PCU2 is ideal for all primary current injection tasks including testing under and over current relays, circuit breakers and CT ratio testing. The system consists of separate control and loading units for maximum flexibility. The control unit contains all control and metering circuitry and is linked to the loading unit by control and metering cables. The control unit is designed to be used with one of two loading units that provide a maximum output current of either 5000A or 6000A for 5 minutes or up to 10kA or 12kA on an intermittent basis. Each loading unit has two outputs which may be connected in series or parallel for maximum flexibility. For example, the LU6000 may be configured to either give a maximum current of 3000A at 6.6V or 6000A at 3.3V.

The control unit is rated at 20kVA and has digital metering. A memory facility is provided on the metering to hold the current reading when the output trips or is switched off. The current is automatically switched off when the device under test trips. A flexible timing system is provided, allowing timing tests to be carried out to a resolution of 1ms. Selection for normally open or normally closed contacts is automatic, and the status of the contacts is shown on the front panel. Timing modes are available to test under and overcurrent devices, reclosers, under and over voltage devices, current trips and circuit breakers. The control and loading units are each housed in tough steel cases fitted with castors and protective lifting handles. The loading units have a small plan area to allow them to be positioned as close as possible to the test object, minimising power requirements and maximising the available current.

T and R PCU2 Features:

• 20kVA 5 minute output capability
• Continuously variable output
• Multi-function timing system
• Digital true RMS memory ammeter
• Bright LED displays
• Automatic switch-off at end of test
• Centralised control and metering
• Separate control and loading units
• Intermittent output up to 12kA
• Continuous output up to 3kA
• Low impedance, dual-range outputs

For more information on T&R PCU2 mk5 Primary Current Injection Test System talk to www.test-meter.co.uk