Tramex CALCRH Calibration Check Plate

Tramex CALCRH Calibration Check Plate

The Tramex CALCRH calibration Check Plate is used to check the moisture measurements on Tramex non-destructive impedance type moisture meters. This process allows the user to verify that the instrument is still performing within the tolerances deemed acceptable by Tramex.

Operation of the CALCRH Calibration Plate

• Power on
• Press the Tramex instrument firmly down on the top surface of the CALCRH so that the spring loaded pins on the moisture meter's electrodes are fully compressed
• Read the results on the moisture meter
• If the measurement is outside of the permitted tolerance printed on the front of the CALCRH Check Plate, the instrument should be returned to Tramex for re-calibration - contact us on 01132 48 99 66 to arrange re-calibration

Compatible with the following Tramex moisture meters

• Tramex CME4 Moisture Meter
• Tramex CRH Moisture Meter
• Tramex CMEX Moisture Meter
• Tramex CME Moisture Meter

For more information on Tramex CALCRH Calibration Check Plate talk to www.test-meter.co.uk