Tramex Water Damage Restoration Kits

Product Code: WDZK5.2

Tramex Water Damage Restoration Kits

All Tramex Water Damage Restoration Kits use the Tramex CMEX II Digital Concrete Moisture Meter and a heavy duty pin-type wood probe to measure moisture levels in concrete and wood, thus allowing professionals to accurately investigate the extent of moisture damage and therefore avoid high humidity levels in structures that can lead to serious subsequent problems.

It includes inputs for the Hygro-i ® relative humidity probe for measuring ambient temperature, humidity, dew point, and mixing ratio as well as for a heavy-duty pin-type wood probe. Both probes are included in all three kit options.

Measures concrete moisture content up to 6.9%
Sizeable, illuminated digital display
Hold function to freeze display on screen
Measures wood moisture content between 7% and 40% through heavy-duty probe
Uses Hygro-i ® relative humidity probe for on-site testing of concrete to BS 8201, 8203, 5325 & ASTM F2170

The Inspection Kit and Master Kit also include a Tramex Moisture Encounter Plus (MEP) Meter which allows non-destructive measurement in wood, plaster, drywall, brick, and roofing.

Measures wood moisture content between 5% and 30%
0 to 100 comparative scale for other materials
Large, clear screen
Hold function

Applications

Tramex Water Damage Restoration Kits are ideal for looking at humidity and dampness left by water damage throughout buildings. Failure to properly assess lingering moisture levels can lead to structural issues, mould, rot, insulation degradation and other serious problems so these Kits each contain the meters, probes and accessories needed for competent, accurate assessment.

Featured Accessories

Hygro-i ® RH Probe For Testing to BS 8201 & ASTM F2170

The Hygro-i ® Relative Humidity Probe is an advanced attachment that works with the Tramex CMEX II Moisture Meter. This opens up several measurement possibilities including measurement of air temperature, relative humidity and dew point as well as readings for these parameters in materials themselves. Hood-type and in situ testing can be carried out with this probe to ASTM F2170 & F2420 standard.

Hole Liner to Perform Testing to BS 8201 & ASTM F2170

In order to make the Hygro-i ® RH Probe fit into drilled holes, a hole liner must be inserted. These can be capped for re-use at a later point.

Calibration Check Salts for RH probes

These salts are supplied to calibrate the Hygro-i ® RH Probe by providing a constant 75% RH in the chamber.

IRTX Infrared Thermometer

A hand-held thermometer that boasts a laser pointer to help ensure accuracy when taking non-contact, infrared surface temperature readings.

Heavy Duty Pin-Type Wood Probe

This hammer probe allows the user to carry out destructive moisture measurement on wood using the Tramex CMEX II Concrete Moisture Meter.

180mm Insulated Pins

These penetrative pins help assess moisture levels deep within a range of materials, thus providing a more comprehensive picture of water damage.

	Tramex Water Damage Restoration EZ Kit (WDZK5.2)	Tramex Water Damage Restoration Inspection Kit (WDIK5.2)	Tramex Water Damage Restoration Master Kit (WDMK5.2)
Tramex CMEX II Moisture Meter	?	?	?
Tramex MEP Moisture Meter		?	?
Hygro-i ® RH Probe	1 included	1 included	3 included
Heavy-duty pin-type wood probe	?	?	?
330mm Hygro-i ® RH Probe			?
RH Sleeves	6 included	8 included	8 included
180mm insulated pins		?	?
IRTX Infrared Thermometer		?	?
Calibration Check Salts			?