Report on the Quality/Consistency and Process Parameter Selection/Ability of the Boy 50m Procan II Injection Moulding Machine

The criterion of the evaluation was to determine the shot and component weight variation that is achievable from the BOY 50M machine on a continual and repeatable basis portrayed in a production environment. This included starting the machine from cold and immediately upon the oil being preheated to the standard default temperature of 40ºC. The attributes of the BOY 50M were as per a standard specification using a Stage II screw motor of medium torque range and rotational speeds (max 415 Nm and 325 rpm) and a general purpose 38 mm screw of 15 : 1 L/D ratio and flight depth ratio of 2.26:1 respectively with a maximum shot capability of 121g in polystyrene. Call us on +44 (0)1733 232211 for a copy of the full report

For more information on Report on the Quality/Consistency and Process Parameter Selection/Ability of the Boy 50m Procan II Injection Moulding Machine talk to G&A Moulding Technology Limited