Nylon 6 & Nylon 66 Extruded

Nylon 6 E (Natural / Black) extruded Polyamide (PA) 6 polymer, being a good general purpose engineering material, with optimum combination of cost, mechanical strength and durability. High mechanical dampening ability.Typical Applications:• General engineering • Sleeves • Rollers • Impact pads • Seal ringsNylon 66 E (Natural / Black) Improved wear resistance, hardness and higher strength compared to 6E. In addition Nylon 66 has a higher melting point and reduced water absorption rate, which results in higher precision on machined parts. Furthermore this grade is FDA approved. With the addition of MOS2 additive, Nylon 66 Black shows improved wear and abrasion resistance, lower coefficient of friction and reduced moisture absorption. Stiffness, tensile strength and temperature resistance are also improved, when compared to Nylon 6 and 66 unfilled grades.Typical Applications: • Sliding bearings • Gears & sprockets • Wearplates • Bearings • Food machineryAlso available in Rod, Tube or SheetFor full Data information please see: www.in2plastics.com

For more information on Nylon 6 & Nylon 66 Extruded talk to IN2 PLASTICS LIMITED