A Brief Introduction To The Danfoss VLT Automation Drive

For decades a production line required the expertise of an engineer to calibrate different motors in the system. All components were different so the stock cupboard would be full of spares based on predictions of which motors were likely to break down more frequently. It would be fair to say that manufacturing in the past was uneconomical and certainly not environmentally friendly. Companies like Danfoss have spent many years finding solutions to the age old problem of redundant spares and relying on person to do all of the programming. Just One Drive Series to Run an Entire production Line The Danfoss VLT Automationdrive FC 300 is the answer to all of these problems as it is a single drive concept that controls all operations from standard to servo motors on any machine or production line. The VLT Automationdrive FC 300 using functions such as; programmable logic controllers, automatic fine tuning of motor control and self analysis of performance. The Danfoss VLT Automationdrive FC 300 series covers the power range from 0.25 to 1200 KW and supports supply voltages in the ranges 200, 380 - 480/500 V, 525 - 600 V and 690 V. It is also possible for it to operate in special network grids such as IT Net. Safe Stop Function The Danfoss VLT Automationdrive FC 302 drive comes as standard with a safe stop function suitable for category 3 installations as defined by EN 954 - 1 and SIL 2/IEC 61508. This feature prevents a drive from starting accidentally. This is essential for applications where preventing unintended starts are of vital importance. The stop function satisfies stop category 0 EN 60204-1. The result is that expensive and bulky external components can be omitted, wiring simplified and down time minimised with this solution. Safety signals can be transferred via discrete signals wiring or safe bus communication. Perfect For All Conditions Danfoss VLT drives are available in IP 20 enclosures, optomised for installation in panels. The optimised efficiency and cooling technology make the compact and service design possible. Equipment such as EMC filters, harmonics suppression and brake modules are integrated in the enclosure. Installation time is saved because because the IP 20 series is designed for easy accessibility and time saving installation by having easy to access mechanical fastening points. The whole IP 20 enclosure system for is modular and and fully compatible with the VLT series. High Reliability In harsh Environments All Danfoss VlT Automationdrive versions have manganese phosphor rear bodies. The back of the IP 66 version is coated with epoxy or polyester spray finish. IP 66 enclosed drives are suitable for outdoor installations and in washdown areas. The silicone gasket is tested with different detergents so the drives can withstand harsh cleaning agents in the food and beverage industry. Cooling air is kept outside the device to prevent any pollution of the electronics and the surfaces are smooth and easy to clean. All in all this VLT drive is the perfect solution for all manufacturing needs. Built in Smart Programmable Logic Controller The smart programmable logic controller is a simple way to keep your drive, motor and application working together. The controller monitors specified events and reacts when the programmed event occurs. After undertaking the action the programmable logic controller then monitors the result of its input and will continue monitoring for up to 20 steps in the production cycle. The Smart logic controller works on the basis of identifying anything that can be defined as, ‘true’ or ,’false’. This includes digital commands and logical expressions. Danfoss call it a ‘logic controller’ because you can programme it to react to any event you choose. Easy Retrofit with VLT Automationdrive Danfoss have developed a system of retrofitting the VLT Automationdrive to your system by reducing costly downtime and the need to repair and replace old components. The conversion kit is available to facilitate exchange form earlier VLT drives. The kit facilitate; mechanical adaption, electrical adaption, parameter adaption and profibus adaption. The VLT Automation Drive is compact and is smaller than their predecessors. User Friendly Control Panel If you are used to using a smartphone and into gadgets the user friendly control panel will definitely appeal to you. the Danfoss VLT drive control panel sports a; graphical display, menu structure, illumination, quick menus, intuitive functions and many useful benefits. The LCP Panel mounting kit allows you to mount the LCP in an IP 65 cabinet front. Smart Programming The setup software is easy to control and provides a general overview of drives systems, large or small. The tool handles all drive related data. The software includes the following feature; Explorer like interface, more efficient service organisation, more efficient commissioning and much much more. Energy Saving Products Danfoss VLT products and solutions contribute to environmental protection by reducing energy consumption and optimising the use of resources. The reliable and efficient automation systems from Danfoss have increased companies’ productivity, saved energy and improved comfort levels. This entry was posted in Product Information and tagged programmable logic controller, Danfoss VLT Automation Drive, Danfoss on April 1, 2015 by ledwpadmin.

For more information on A Brief Introduction To The Danfoss VLT Automation Drive talk to LED Controls Ltd