How to fit showerwall panels

Fitting Showerwall panels involves several steps to ensure proper installation. Showerwall panels are a type of waterproof and hygienic wall cladding commonly used in bathrooms and shower areas. Here's a general guide on how to fit Showerwall panels:

Materials and Tools Needed:

• Showerwall panels
• Adhesive or adhesive kit recommended by the manufacturer
• Saw or utility knife
• Measuring tape
• Level
• Silicone sealant
• Notched trowel or spreader
• Panel adhesive
• Corner trims and end caps (if applicable)
• Sealant gun
• Screws and wall plugs (for some installations)

Installation Steps:

Prepare the Surface: Ensure the wall surface is clean, dry, smooth, and free from any dirt, grease, or loose material. If necessary, repair or patch any damaged areas.

Measure and Cut: Measure the dimensions of the area where you'll be installing the Showerwall panels. Using a saw or utility knife, carefully cut the panels to the appropriate size. Make sure to account for any cutouts needed for fixtures like pipes or outlets.

Apply Adhesive: Follow the manufacturer's instructions for applying adhesive. Typically, you'll apply adhesive to both the back of the panel and the wall surface. Use a notched trowel or spreader to ensure even coverage.

Install the Panels: Carefully press the panel onto the adhesive-covered wall, starting from the bottom and working your way up. Use a level to ensure the panel is straight and aligned correctly. Press the panel firmly to ensure good adhesion. If you're using multiple panels, make sure they fit snugly together without gaps.

Trim and Seal Corners and Edges: Install corner trims and end caps if your Showerwall kit includes them. These will provide a clean and finished look to the corners and edges of the panels. Apply adhesive to the back of the trims and press them into place.

Repeat for Additional Panels: If you have multiple panels to install, repeat the adhesive application and installation process for each panel. Make sure to align them properly and maintain consistent spacing between panels.

Finishing Touches: Once all panels are in place, allow the adhesive to dry according to the manufacturer's instructions. Once the adhesive is dry, seal the edges and corners with silicone sealant. This will provide an extra layer of waterproofing and prevent water from seeping behind the panels.

Clean and Maintain: After installation, clean the panels and the entire area to remove any adhesive residue or dirt. Regularly clean and maintain the Showerwall panels according to the manufacturer's recommendations to ensure their longevity and appearance.

Remember, these are general steps, and it's crucial to carefully read and follow the manufacturer's instructions provided with your specific Showerwall panels. Improper installation can lead to issues such as poor adhesion, leaks, or an uneven appearance. If you're unsure about any step, consider consulting a professional or contacting the manufacturer for guidance.     

For more information on How to fit showerwall panels talk to Perform Panel supplied by BPO Ltd