Installing Wet Wall Panels

A Step-By-Step Guide to Installing Wetwall Shower Panels

When it comes to enhancing your shower space with both beauty and functionality, wetwall shower panels stand out as a popular choice. Offering a stylish and waterproof surface coupled with a relatively straightforward installation process, these panels have become a favorite among DIY enthusiasts. If you're considering installing wetwall shower panels in your bathroom, this comprehensive step-by-step guide will walk you through the process.

Tools and Materials You'll Need:

• Perform Panel shower panels
• Adhesive or sealant suitable for wet areas
• Screws and plugs (if required)
• Measuring tape
• Cutting tools (e.g., saw, circular saw, or utility knife)
• Level
• Drill or screwdriver
• Safety equipment (gloves, safety goggles)

Step-by-Step Installation:

1. Prepare the Surface:

• Ensure the shower wall surface is clean, dry, and free from debris.
• Remove any existing tiles or wall coverings and repair any wall damage.
• Check that the wall is level and smooth.

2. Measure and Cut Panels:

• Measure the shower area to determine the panel sizes needed.
• Mark the panels accordingly, allowing for overlaps or expansion gaps as per manufacturer instructions.
• Use appropriate cutting tools to cut panels to size, following manufacturer guidelines for clean edges.

3. Apply Adhesive or Sealant:

• Apply adhesive or sealant evenly to the back of the wetwall shower panel.
• Use the recommended adhesive or sealant as per the manufacturer's instructions.

4. Position the Panel:

• Carefully position the panel on the wall, aligning it with reference lines.
• Use a level to ensure the panel is plumb and level.
• Apply pressure to ensure a secure bond with the wall.

5. Secure the Panel:

• If required, use screws and plugs to secure the panel in place.
• Drill holes through the panel, insert plugs, and then screw the panel into position.

6. Repeat for Additional Panels:

• Install additional panels, ensuring proper alignment and a snug fit between panels.
• Seal overlaps and joints with appropriate sealant.

7. Trim and Finish:

• Trim any excess material and ensure corners and edges are neat and finished.

8. Seal Joints and Corners:

• Seal all joints, edges, and corners with the recommended sealant for a watertight finish.

9. Clean and Inspect:

• Clean the surface of panels to remove adhesive residue.
• Inspect the installation to ensure panels are securely fixed without gaps or loose sections.

10. Allow for Curing Time:

• Follow the manufacturer's instructions for curing or drying times of adhesive or sealant.

Installing wet wall shower panels can be a gratifying DIY project that elevates your bathroom's aesthetics and functionality. These panels offer both waterproofing and style. However, it's vital to adhere to manufacturer guidelines for successful installation. With the right tools, materials, and patience, you'll achieve a stunning and enduring shower enclosure to enjoy for years to come.

For more information on Installing Wet Wall Panels talk to Perform Panel supplied by BPO Ltd