Why choose Perform Panel?

There are so many decisions to make when planning your bathroom refurbishment: materials, colours, bath, shower or both. Should you go down the traditional ceramic tiling route, or are shower panels a better option? If you haven’t heard of waterproof bathroom wall panels, where have you been? Here’s some more information about the waterproof bathroom panels that will change the look of you bathroom for the better. 

There are several benefits of installing bathroom panels instead of tiles. From offering better hygiene to enhanced design aesthetics, it can prove to be a thoroughly effective solution for any working environment. We have outlined just some of the benefits below:

• Convenience: While installing tiles can be a tedious and difficult job, Perform Panel can be installed directly over tiles, meaning quicker and easier installation. Bathroom tiles also require a greater level of attention. While panels can be installed and left to serve their purpose for longer with their 35 year guarantee, tiles need to be installed carefully to maintain a stylish look, which ultimately takes longer and can be difficult to achieve.

• Hygienic Protection: Having bathroom panels instead of tiles can work to ensure that environments are as clean as possible for as long as possible. Panels typically have fewer joints than tiles, meaning that there are no porous, grouted areas that can easily harbor bacteria. The benefit of this is that they are easier to clean and maintain, thus providing hygienic protection for longer.

Perform Panel doesn’t hold on to bacteria like tiles would and can be wiped clean in seconds with warm water and non-abrasive cleaner.

• Design Aesthetics: It is a common misconception that bathroom panels, while superior in providing hygienic protection, are ultimately dull and available in a limited range of colours and finishes. This, however, isn’t the case. Perform panel offers a wide variety of different designs, textures and finishes. Giving you the perfect finish to your room. 

• Quick And Easy To Install: Perform Panels range of waterproof panels, with their perfect balance of high-end design and functionality, could be exactly what you are looking for. A real bonus of opting for bathroom panels instead of tiles is that they are quick to install and can be ready to use in just 24 hours. There’s no hanging around for grouting to be applied and then dried before you can hop into the bathroom, meaning you aren’t without your bathroom for too long. Panels can be fitted directly on top of existing tiles, stud walls, wood or even concrete. 

• No Grout, No Hassle: Tile grout can be one of the more common areas targeted by mould, with the potent mix of condensation and moisture in bathrooms providing the perfect environment for it to take hold. With bathroom panels, however, the on-going fight against mould can be considered history, because there is none!

• Nu Lock – Tongue & Groove: This provides an almost seamless connection: Joining bathroom panels has now never been easier Perform Panels.  Our unique virtually seamless Nu Lock tongue and groove joint provides a watertight installation without the need for additional fitting, so that there’s nothing to interrupt the flow of your beautiful wall of bathroom panels.

• Bathroom Panels Are Easier To Clean: When it comes to cleaning, there’s no need for bleach and scourers to tackle grubby grout as Multi panel bathroom wall panels are totally grout-free, require very little attention the occasional quick wipe down is all that’s needed to keep them clean and in tip-top condition for years to come.

• Versatile Design Options: And remember, your bathroom will look amazing with either Perform panel wall panels fitted on every wall or just in the shower cubicle, above the bath or around the sink.

Perform Panel is easy to maintain, attractive and brings in some interesting advantages to your bathroom décor. 

A big question is how are bathroom wall panels manufactured?

Bathroom wall panels are usually manufactured to be 11mm thick – 9mm weather and boiled proof exterior grade plywood or moisture resistance MDF weight and all boards are bonded with 3mm high pressure laminate to the front face. 

Because of product size, large wall areas can easily be covered, all in just a short amount of time – much less than what you would have to spend with tiles. You can fit the bathroom wall panels to most bathroom wall types. The only thing that is needed is a straight wall so that suitable fixing can be applied for adhesive, plugs and screws.

Easy Maintenance

What is important to understand is that bathroom wall panels are incredibly easy to clean. As opposed to paint or wallpaper, which is known for flaking or peeling, and tiles which can easily chip or crack, wall panels are incredibly durable. There is a high possibility that no damage is going to appear, even when you have had them a long time. This is why we Perform Panel offer a 35 year guarantee. 

Final Thoughts

So before you add tiles to your bathroom, do take time to consider the benefits of using wall panels instead. They are hard-wearing, attractive, low maintenance and highly economical, plus offer a quick and easy way to transform your bathroom style.

For more information on Why choose Perform Panel? talk to Perform Panel supplied by BPO Ltd