SLS3, SEND Unit with External Antenna, 3 Inputs, SafeLink Wireless Communication

Model : SLS3 Series : SLS3 Product Lines : Workholding Tools SafeLink provides wireless communication between the fixture mounted SEND unit and the machine control interfaced RECEIVE unit.A pressure switch is used on the fixture to monitor the circuit pressure. If the pressure switch on the fixture goes open, the RECEIVE unit communicates the changed status to the machine control through either 24 VDC, Modbus RTU RS485 or Ethernet IP protocol or Modbus TCP/IP.The machine control would interrupt the machining process. The SEND unit can also be used with limit switch based position sensing clamps to verify clamped or unclamped status for robotically loaded systems.SafeLink can provide a discrete 24VDC output signal for systems of up to 4 fixtures. Each SEND unit can provide up to three outputs to the RECEIVE unit. The RECEIVE unit has 6 terminal stations, which are assigned to SEND units in groups of 3. So each RECEIVE unit can be paired with 2 SEND units when using the 24VDC output. For extra capacity, an EXPANSION MODULE provides an additional terminal strip, adding 2 more sets of three terminal stations. Fixture mounted ?SEND? unit uses radio communication to monitor pressure and/or clamp position2.4 GHz Frequency Band for global acceptance?Frequency Hopping? used to for signal stability, even in busy production environments?SEND? units are easily reassigned to a different ?RECEIVE? unit so fixtures can be moved between machinesNo limit to the number of systems used in a production area?SEND? units are internally powered by a replaceable 3.6 VDC Lithium battery ? provides up to 3-year battery life?SEND? units are sealed to IP-67 for protection from contamination and coolantLED lights for visual status indicationLCD Display window for set-up and status display

For more information on SLS3, SEND Unit with External Antenna, 3 Inputs, SafeLink Wireless Communication talk to Shaw Hydraulics Ltd