Add My Company
Two bearing systems are common in air moving products, sleeve bearings or ball bearings. There are several factors that make it important to consider your choice when making a selection for your application. sleeve bearings in industrial fans Sleeve bearing fans are more economical; however it is not recommended that they are mounted in any position other than horizontal. Temperature is another consideration; if the temperature exceeds 70°C the fan will become inoperable.
The lifetime of a sleeve bearing fan is often shorter than that of a ball bearing fan, however if the temperatures are low within the application then similar lifetime expectancy can be achieved. So if the application generates low heat or has a short life span then a sleeve bearing fan can be considered. ball bearings in industrial fansBall bearing fans can be mounted in any orientation. This is because preloading of the bearings is undertaken during manufacture which is achieved with a spring or wave spring washer. The temperature operating range of ball bearing fans is greater, unlike the sleeve bearing model a standard ball bearing will operate up to 70°C and within some designs higher still. Because of this increased durability lifetime is greater and on average 50 percent.
In conclusion if the application generates high heat levels, has a longer lifespan and requires the fan to be mounted in a position other than horizontal then the design engineer should use a ball bearing fan. Noise is often a consideration and in the past it was thought that sleeve bearing fans ran quieter. This is true for applications that have very low speed. Yet with the improvements in preloading, ball bearing fans can work as quietly as sleeve bearing especially with applications that require faster velocities. Lubrication is another issue, sealed for life ball bearings use thicker lubricants and additives which are less subject to evaporation. The lubricants within sleeve bearings have a greater concentration of oil, they hold less however and the system is more prone to evaporation.
For more information on What’s the difference between Sleeve Bearings and Ball Bearings talk to Axair Fans UK Ltd