Bottom Emptying Skip

Bottom Emptying Skip\nBottom Emptying Skip allows the simple but effective disposal of light to medium weight waste when being automatically emptied into high sided yard skips via the base release mechanism, without the driver leaving the safety of his seat.\nStandard Features:\n\n125mm diameter nylon castor fitted as standard\nInternally reinforced sides and lap welded corners\nUnique automatic releasing and locking mechanism\nMaximum fork section 150 x 50 mm at 683 mm centres\nZinc plated heel pins for safe attachment to truck\nPainted bright orange for safety\n\nOptional Features:\n\nColour finish for waste separation or department\nHinged lid\n\nBottom Emptying Skip Sizes:\n\n\n\nModel\nCapacity\nWeight\nC of G\nLength\nWidth\nHeight\nNominal Capacity\n\n\nIBE-1\n550kg\n212kg\n385mm\n850mm\n1050mm\n900mm (o/a - 1170mm)\n0.80 m3\n\n\nIBE-2\n750kg\n255kg\n500mm\n1050mm\n1200mm\n900mm (o/a - 1170mm)\n1.20 m3\n\n\nIBE-3\n950kg\n287kg\n500mm\n1050mm\n1500mm\n900mm (o/a - 1170mm)\n1.45 m3\n\n\n\nOperation:\n\nPosition the forks the correct distance apart to locate into fork pockets.\nRemove fork pocket heel pins from skip.\nDrive forks into the fork pockets.\nInsert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into the hole provided.\nTake the bottom empty skip to the yard skip and position the actuator plates (on the rear of the skip base) over the side of the yard skip.\nWith the mast vertical lower the actuator plates onto the side of the yard skip and to activate the release hooks.\nKeeping the mast vertical, lift the carriage of the forklift truck so as the drop bottom door clears the side of the yard skip and reverse clear.\nLower the skip to the ground to automatically re-latch the drop bottom door – some forward tilt may be required dependent on-site conditions.\nThe skip is now ready for use again.\n\nLead Time: 1 week.

For more information on Bottom Emptying Skip talk to Merlin Industrial Products Ltd