Combi Skip

Combi Skip\nCombi Skip is designed to simplify the holding, movement and disposal of material in confined areas with the unique ‘4-way entry’ base.\nThe skip is supplied as manual operation as standard, but automatic tipping at high level can be achieved by ordering the conversion kit allowing the forklift / tele handler driver to empty the skip without leaving the safety of his seat.\nCombi Skip Standard Features:\n\nLow loading height\nReinforced leading edge and body sides\n4-way fork pocket entry\nSecondary Locking Mechanism to prevent accidental discharge\nFully seam welded for retention of fluids\nManual handle override\nMaximum fork section 150 x 50 mm at 675 mm centres\nZinc plated heel pins for safe attachment to truck\nPainted bright orange for safety\n\nCombi Skip Sizes:\n\n\n\nModel\nCapacity\nWeight\nLength\nWidth\nHeight\nC of G\nNominal Capacity\n\n\nICUS-0\n400kg\n166kg\n1220mm\n1030mm\n690mm\n760mm\n0.5 m3\n\n\nICUS-1\n750kg\n222kg\n1600mm\n1060mm\n830mm\n785mm\n0.9 m3\n\n\nICUS-2\n960kg\n229kg\n1600mm\n1300mm\n830mm\n725mm\n1.2 m3\n\n\nICUS-3\n1100kg\n251kg\n1600mm\n1560mm\n830mm\n685mm\n1.5 m3\n\n\nICUR-4\n1500kg\n277kg\n1800mm\n1560mm\n955mm\n650mm\n1.8 m3\n\n\n\nOverall skip height note:\nAdd 205mm to body height to give overall skip height\nAdd 230mm to body length to give overall skip length\nOperation:\nTO OPERATE VIA RELEASE HANDLE:\n\nPosition the forks the correct distance apart to locate into fork pockets.\nRemove fork pocket heel pins from skip.\nDrive forks into the fork pockets.\nInsert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into the hole provided.\nTake the forklift skip to the intended area to be tipped and release the secondary lock mechanism on the rear.\nTo release the skip and empty the contents pull the release handle.\nOnce emptying is complete pull the skip back so as to re-latch on to the hook\nReplace the safety lock mechanism.\nThe skip is now ready for use again.\n\nTO OPERATE VIA AUTO-RELEASE:\nFollow steps 1-4 above and then:\n\nTake the forklift skip to the large yard skip and release the secondary lock mechanism on the rear of the skip.\nPosition the forklift skip at the correct height with the actuator plate positioned over the yard skip side (the actuator plate is located between the two side entry fork pockets).\nLower the forklift skip on to the side of the yard skip until the hook release mechanism is disengaged.\nRaise the forklift to clear the side of the yard skip, pull away and lower safely to the ground. Once emptying is complete pull the skip back so as to re-latch on to the hook.\nReplace the safety lock mechanism.\nThe skip is now ready for use again.\n\nLead Time: 1 week.

For more information on Combi Skip talk to Merlin Industrial Products Ltd