Fork Mounted Drum Tilter

Fork Mounted Drum Tilter\nFork Mounted Drum Tilter regardless of access this product allows the safe discharge from steel and plastic drums with minimal ease within any confined space, with the option of crank handle or looped chain for low or elevated level-controlled discharge.\nStandard Features:\n\nRobust gearbox allowing drum to be locked and held at any angle\nThree-point mechanical restraints to prevent drum slippage\nTwin 50mm wide webbing strap with ratchet restraint\nMaximum fork section 125 x 50 mm at 801 mm centres\nZinc plated heel pins for safe attachment to truck\nPainted bright orange for safety\n\nOptional Features:\n\nPlastic drum adaptor\n\nSize:\n\n\n\nModel\nCapacity\nWeight\nC of G\nMounting Type\nType of Control\n\n\nIDTL-1.0\n360kg\n70kg\n560mm\nFork\nCrank Handle\n\n\nIDTL-2.0\n360kg\n95kg\n560mm\nFork\nLooped Chain\n\n\n\nOperation:\nTO OPERATE VIA RELEASE HANDLE:\n\nPosition the forks to the correct distance apart to locate into fork pockets.\nRemove the heel pins from the attachment.\nDrive the forks into the fork pockets.\nInsert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.\nRotate the pressed hoop so that it is horizontal with the fork pockets.\nPosition pressed half hoop between the two centre ribs of the drum also ensuring that the 3 slide prevention plates are within the ribs.\nInsert each strap into ratchet and pull tight.\nFully tighten both straps ensuring a minimum of 2 rotations of the spindle, a maximum of 3 and snap into ratchet housing.\nThe attachment is now ready for use.\n\nLead Time: 1 week.

For more information on Fork Mounted Drum Tilter talk to Merlin Industrial Products Ltd